Larson Electronics 25KVA Temporary Power Distribution - 480V to 120/240V 1PH - (22) Receptacles - GFCI Breakers MGL-480V-25KVA-20X120.20A-2X240.30A-20C-M1

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MGL-480V-25KVA-20X120.20A-2X240.30A-20C-M1 temporary power distribution system converts single-phase 480V AC electrical current into single-phase 120/240V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Portable Power Distribution Purpose and Use: The MGL-480V-25KVA-20X120.20A-2X240.30A-20C-M1 portable power distribution system gives operators the ability to power their 120 volt equipment from a single system. On the primary side, operators connect 480VÊusing a 20` #8 Type W cable. On the secondary side, operators connect to two L6-30R receptacles for 240V equipment and to twenty duplex receptacles for 120V equipment. All receptacles are equipped with weatherproof covers.

Operation: A 20` #8 Type W cable brings single-phase 480V power to the NEMA 3R 60-amp, 480V single phase primary disconnect, which contains two 60-amp time delay fuses, and passes 480V single phase power through to the transformer. The NEMA 3R 25 KVA transformer converts 480V to 120/240V single phase and passes the current to the secondary side. The secondary side of the transformer feeds a NEMA 3R 120/240V single phase 125-amp main lug only panel. This secondary side contains two 30-amp 2-pole GFCI 250V breakers protecting two 30-amp 250V L6-30R receptacles and ten 30-amp 1-pole GFCI 125V breakers protecting twenty 20-amp 5-20R 125V duplex receptacles.

Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks.

This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA and can be equipped with skids or trailer mounted.

Certification: All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations.

Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.