Larson Electronics 25 Watt Low Profile LED Hazardous Area Light Fixture - 15' Cord - 120-240V w/ Stepdown Transformer

Buy American Compliant The Larson Electronics HAL-36-25W-LED-JB-1227 is a low profile hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 120 to 240 VAC, and is suitable for a variety of applications. The HAL-36-25W-LED-JB-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This explosion proof light can be powered from 120-240V AC power sources and includes 15 feet of SOOW cable terminated in a standard 5-15 or 6-20 explosion proof plug. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures. Durability/Mounting: The HAL-36-25W-LED-JB-1227 hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. The LEDs in this linear light are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170¡ vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length, 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed. Wiring/Power: These hazardous location LED lights are equipped with 15 feet of cord containing an explosion proof 5-15 plug rated at 15 amps for 125V or 6-20 plug rated at 20 amps for 240V. These lights operate from 120-240 volt AC current at 25 watts drawing 0.21 amps on 120 VAC and 0.11 amps on 240 VAC. Versatility: The HAL-36-25W-LED-JB-1227 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered. Specifications / Additional Information HAL-36-25W-LED-JB-1227 Hazardous Location LED Lighting ETL Listed Lamp Type: LED Class 1 Division 2 Groups A,B,C,D Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D CSA 22.2 No. 250.0 Weight: 2.1lb | 0.9 k g UL 1598 Watts: 25 IP54 Ingress Protection Voltage: 120-240 VAC T3 Temperature Rating Lumens: 1812 Lamp Life Expectancy: 100,000 Hours CRI: 75 Amps: 0.21A @ 120 VAC - 0.11A @ 240 VAC Light Color: 6500K Beam Type: 100¡ Flood or 30¡ Spot Special Orders- Requirements Mounting: Standard Triangle End Brackets Contact us for special requirements Temp Range: -40¡C – +85¡C Toll Free: 1-800-369-6671 Wiring: 15` SOOW cable - explosion proof plug Cord Cap: 5-15 (125V) or 6-20 (240V) EXP Plug E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase- Buy American Compliant The Larson Electronics HAL-36-25W-LED-JB-1227 is a low profile hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 120 to 240 VAC, and is suitable for a variety of applications. The HAL-36-25W-LED-JB-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This explosion proof light can be powered from 120-240V AC power sources and includes 6 feet of SOOW cable terminated in a standard 5-15 explosion proof plug. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures. Durability/Mounting: The HAL-36-25W-LED-JB-1227 hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. The LEDs in this linear light are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170¡ vertically for the best placement. The entire assembly weighs 2.1 lbs and measures 35.88 inches in length, 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed. Wiring/Power: These hazardous location LED lights are equipped with 6 feet of cord containing an explosion proof 5-15 plug rated at 15 amps. These lights operate from 120-240 volt AC current at 25 watts drawing 0.21 amps on 120 VAC and 0.11 amps on 240 VAC. Versatility: The HAL-36-25W-LED-1227 is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered. Specifications / Additional Information HAL-36-25W-LED-1227 Hazardous Location LED Lighting ETL Listed Lamp Type: LED Class 1 Division 2 Groups A,B,C,D Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D CSA 22.2 No. 250.0 Weight: 2.1lb | 0.9 k g UL 1598 Watts: 25 IP54 Ingress Protection Voltage: 120-240 VAC T3 Temperature Rating Lumens: 1812 Lamp Life Expectancy: 100,000 Hours CRI: 75 Amps: 0.21A @ 120 VAC - 0.11A @ 240 VAC Light Color: 6500K Special Orders- Requirements Beam Type: 100¡ Flood Contact us for special requirements Mounting: Standard Triangle End Brackets Toll Free: 1-800-369-6671 Temp Range: -40¡C – +85¡C Wiring: 6Ft SOOW cable - EPP-15A EXP Plug E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-