Larson Electronics 25 KVA Temporary Power Distribution - 480V to 120/240V 1PH - GFCI Breakers - NEMA 3R

Made in Texas The Larson Electronics MGL25-8C-480-13X120-1X240-GFIB temporary power distribution system converts 480VAC electrical current into 120/240VAC single phase. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MGL25-8C-480-13X120-1X240-GFIB temporary power distribution system gives operators the ability to power their 120V and 240V equipment from a single system. On the primary side, operators connect 480V line-in power via 25` of #8 Type W cord with an APJ6485 60A 600V-rated cord cap. On the secondary side, operators connect to one 14-50R receptacle for 120/240V equipment, one 5-30R, two duplex 5-20R, and ten duplex 5-15R receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A #8 Type W line-in cord with a 60A 600V-rated cord cap brings 480VAC power to the NEMA 3R 60A 480V three phase primary disconnect, which contains two 60A time delay fuses and passes 480V through to the single phase transformer. The NEMA 3R 25KVA transformer converts 480V to 120/240V single phase and passes power to a secondary panel. The secondary side of the transformer feeds a NEMA 3R 120/240V single phase 125A main lug only panel. This secondary panel contains one 50A 2P 250V GFCI-breaker protecting one 50A 125/250V 14-50R receptacle, one 30A 1P 125V GFCI-breaker protecting one 30A 125V 5-30R receptacle, two 20A 1P 125V GFCI-breakers protecting two 20A 5-20R 125V duplex receptacles and ten 15A 1P 125V GFCI-breakers protecting ten 15A 125V duplex receptacles. Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL25-8C-480-13X120-1X240-GFIB -Temporary Power Distribution System Ratings Line-In Cord: 25` #8 Type W Cord Max Primary OCP: 60A @ 480V Line-In Cord Cap: 600V-rated 60A 3P4W APJ6485 Max Secondary Output: 104.2A @ 240V Primary Voltage: 480VAC UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 480V 60A 3PH Fused @ 60A N3R NEMA 3R Indoor / Outdoor Use Primary Panel: - N/A Made in the USA Primary Breakers: - N/A Primary Receptacles: - N/A Primary Protection: 60A Time Delay Fuses Transformer: 25KVA 480V to 120/240V 1PH N3R Secondary Voltage: 120/240VAC Secondary Disconnect: - N/A Secondary Panel: 120/240V 125A MLO 1PH N3R Secondary GFCI-Breakers: (1) 50A 2P 250V, (1) 30A 1P 125V, (2) 20A 1P 125V, (10) 15A 1P 125V Secondary Receptacles: (1) 50A 14-50R [125/250V], (1) 30A 5-30R [125V], (2) 20A 5-20R duplex [125V], (10) 15A 5-15R [125V] Secondary Protection: Weatherproof Covers, GFCI Breakers Special Orders- Requirements Form Factor: Steel Dolly Cart w/ Run Flat Tires Contact us for special requirements Frame Materials: Powder Coated Steel Frame Toll Free: 888-325-4448 Dimensions: W-40" X D-40" X H-48" Weight: 550 lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase