Larson Electronics 25 KVA Temporary Power Distribution - 480V to 120/240V 1PH - (1) 480V (1) 240V (3) 120V Receptacles

Made in Texas The Larson Electronics MGL-480.3P-1X20.3P-25KVA-2X20A.1P-1X20A.2P-1X50A temporary power distribution system converts 480V AC three phase current to 120/240V single phase. This power distribution system provides operators the ability to safely tap into and distribute 480V power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use The MGL-480.3P-1X20.3P-25KVA-2X20A.1P-1X20A.2P-1X50A portable power distribution system gives operators the ability to power their 480V, 240V and 120V equipment from a single system. On the primary side using a customer provided cord, operators connect to one L16-20R twist lock receptacle for 480V equipment. On the secondary side, operators connect to one L6-20R receptacle for 240V equipment, to one 14-50R receptacle for 120V equipment and to two GFCI duplex receptacles for 120V equipment. Operation: A customer provided cord brings 480V three phase power to the NEMA 3R 100-amp primary main lug panel, which contains one 20-amp 480V breaker protecting one L16-20R 480V receptacle, and passes 480V three phase through to the transformer. The NEMA 3R 25 KVA transformer converts 480V three phase power to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 104.2-amp, 120/240V single phase main lug only circuit breaker enclosure, which contains one 20-amp, 240V breaker protecting one L6-20R 240V receptacle; one 50-amp, 120V breaker protecting one 14-50R 120V receptacle; and two 20-amp, 120V breakers protecting two GFCI duplex 120V receptacles. All receptacles are equipped with weatherproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL-480.3P-1X20.3P-25KVA-2X20A.1P-1X20A.2P-1X50A -Temporary Power Distribution System Ratings Line In: Customer Provided Max OCP Primary: 100A @ 480V Line-In Cord Cap: Customer Provided Max OCP Secondary: 104.2A @ 240V Primary Voltage: 480V 3P UL 1640 Portable Power-Distribution Equipment Primary Disconnect: - NEMA 3R Indoor / Outdoor Use Primary Panel: 480V 100A Main Lug N3R Panel Made in the USA Primary Breakers: (1) 20A Primary Receptacles: (1) L16-20R [480V] Primary Protection: Weatherproof Cover Transformer: 25KVA 480V to 120/240V 1PH N3R Secondary Voltage: 120/240V 1P Secondary Disconnect: - Secondary Panel: 120/240V 104.2A MLO N3R Secondary Breakers: (1) 50A, (3) 20A Special Orders- Requirements Secondary Receptacles: (1) L6-20R [240V], (1) 14-50R [120V], (2) GFCI Duplex [120V] Contact us for special requirements Secondary Protection: GFCI, Weatherproof Cover Toll Free: 888-325-4448 Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Dimensions: W-40" X D-40" X H-48" E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase