Larson Electronics 25 KVA Temporary Power Distribution - 480V to 120/240V 1PH - (2) L16-30R (2) L6-30R (2) 5-20R Duplex

Made in Texas The Larson Electronics MGL-480.3P-2X30.3P-25KVA-2X20A.1P-2X30A.2P temporary power distribution system converts 480V AC to single phase 120/240V AC. This power distribution system provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGL-480.3P-2X30.3P-25KVA-2X20A.1P-2X30A.2P temporary power distribution system gives operators the ability to power their 480 volt, 240 volt and 120 volt equipment from a single system. On the primary side using a customer provided cord, operators connect to one L16-20C twist lock receptacle for 480V equipment. On the secondary side, operators connect to two L6-30R receptacles for 240V equipment and to two 5-20R duplex receptacles for 120V equipment. Operation: A customer provided line-in cord brings 480V three phase power to the NEMA 3R 100-amp main lug only panel, which contains two 30-amp breakers protecting two 30-amp, 480V L16-30R receptacles and passes 480V single phase through to the transformer. The NEMA 3R 25 KVA transformer converts 480V power to 120/240V single phase and passes the current to the secondary side of the transformer. The secondary side of the transformer feeds a NEMA 3R 125-amp, 120/240V single phase secondary main lug only panel. This main lug only panel contains two 30-amp breakers protecting two 30-amp, 250V L6-30R receptacles and two 20-amp breakers protecting two 20-amp, 120V 5-20R duplex receptacles. All receptacles are equipped with weatherproof covers. Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150 KVA and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL-480.3P-2X30.3P-25KVA-2X20A.1P-2X30A.2P -Temporary Power Distribution System Ratings Line In: Customer Provided Cord UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V 3PH NEMA 3R Indoor or Outdoor Use Primary Disconnect: - Made in the USA Primary Panel: 480V 3PH 100A MLO N3R Primary Breakers: (2) 30A Primary Receptacles: (2) 30A L16-30R [480V] Protection: Weatherproof Covers Transformer: 25KVA 480V to 120/240V 1PH N3R Secondary Voltage: 120/240V 1PH Secondary Panel: 120/240V 1PH 125A MLO N3R Secondary Breakers: (2) 30A, (2) 20A Secondary Receptacles: (2) 30A L6-30R [250V], (2) 20A 5-20R Duplex [120V] Secondary Protection: Weatherproof Covers Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Dimensions: W-40" X D-40" X H-48" Special Orders- Requirements Weight: 350 lbs Contact us for special requirements Features: Toll Free: 888-325-4448 Max Primary OCP: - Max Secondary OCP: 60 amps @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase