Larson Electronics 25 KVA Power Substation - 480V to 120/240V 1PH - Camlocks/ATS - Skid Mount - N3R MPD-ATS.200A-2X80A.480CL-25KVA-1X50A.240.CL

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MPD-ATS.200A-2X80A.480CL-25KVA-1X50A.240.CL power distribution substation converts three-phase 480V ACÊelectrical current into single-phase 120/240V AC. This skid unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Portable Power Distribution Purpose and Use
The MPD-ATS.200A-2X80A.480CL-25KVA-1X50A.240.CL portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators bring three-phase 480V power into the unit via two sets of E1015 female panel camlocks (brown, orange, yellow and green). On the secondary side, operators are provided access to one set of female panel camlocks (black, red, white and green) for single-phase 120/240V equipment.

Operation: Two sets of 150-amp 600V rated E1015 female panel camlocks (brown, orange, yellow and green) bring three-phase 480V power to the NEMA 3R 200-amp, three-phase 480V primary main circuit breaker panel, which contains two 80-amp 3-pole 480V and one 40-amp 3-pole 480V breakers, and passes three-phase 480V to a NEMA 3R 200-amp, three-phase 480V manual transfer switch. This manual transfer switch allows operators to connect to the power distribution system using customer-provided feeders to power three-phase 480V equipment.

The main circuit breaker panel on the primary side also passes single-phase 480V power to the transformer. The NEMA 3R 25 KVA transformer converts single-phase 480V to single-phase 120/240V and passes the current to the secondary side of the system. The secondary side of the transformer feeds a NEMA 3R 60-amp, single-phase 120/240V disconnect. This secondary disconnect contains two 50-amp time delay fuses and one set of 150-amp 600V rated female panel camlocks (black, red, white and green).

Click Photo to Enlarge	Click Photo to Enlarge

Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customerÕs needs. Larger units are available upon request and can be equipped with skids or trailer mounted.

Click Photo to Enlarge	Click Photo to Enlarge

Certification: All units are built in accordance to NFPA 70 (National Electric Code). All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4x equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.

Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.