Larson Electronics 2013 Ford F150 No Drill Mounting Plate - 3rd LED Brake Light High Mount - Magnetic Plate - 24" x 8"

Made in Texas The MMP-F150-2013-LED from Larson Electronics is a No Drill Steel Magnetic Mounting Plate for any light with a magnetic mounting base, including spotlights, flood lights, strobe lights, beacons, warning lights, signal lights, flashers, turn signals, brake lights, hunting lights, fishing lights, off-roading lights and so on. This lightweight mounting plate requires absolutely no drilling to install and can support lights of up to 20 lbs. The MMP-F150-2013-LED features a 24" by 8" magnetic mounting surface, is compatible with 2013 Ford F-150 aluminum body pickup trucks and offers operators a convenient mounting location for any magnetic light and for applications including hunting, fishing, off-roading and security. *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* Click image to Enlarge Click image to Enlarge The MMP-F150-2013-LED is constructed in Texas from durable aluminum for the frame and brackets and steel for the mounting plate surface. This magnetic mounting plate has been designed for 2013 model year Ford F-150 aluminum body pickup trucks and offers operators a sturdy and reliable platform to deploy magnetic mount lights of any type such as spotlights, strobes, beacons, hunting spotlights, signal lights, security lights and warning lights, on the top of their truck for optimal performance. The MMP-F150-2013-LED is installed via the rear cab lights and has a weatherproof seal on the back side for secure, dry installation and protection against scrapes to the body of the truck. The mounting plate requires absolutely no drilling for installation and is powder coated for added durability, can support up to 20 lbs and is offered in a black, white, or grey finish. The MMP-F150-2013-LED also features a windload okay for highway speeds. (User provided equipment may vary.) *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* Installation: The MMP-F150-2013-LED is easy to install and requires absolutely NO drilling. This magnetic mounting plate installs via the 3rd brake light on 2013 model year Ford F150 pickup trucks between the body of the truck cab and the light. Operators simply remove their 3rd brake light, position the mounting plate bracket and reinstall the light through the bracket. Having a bed camera in the 3rd brake light (NOT in the tailgate or bumper) will change the mounting bracket design. This bed camera is commonly referred to as "high mount camera" or "cargo camera." The view of this camera shows the contents of the truck bed. This IS NOT the reverse camera that is located in the tailgate that shows behind the vehicle. Those with a high mount bed camera with 3rd brake light must choose the "camera" option in order to get the correct design. Please choose the appropriate option below. *Please note that the MMP-F150-2013-LED is designed for trucks with LED 3rd brake lights ONLY. Operators with incandescent 3rd brake lights will require the MMP-F150-2013. Incandescent mounting plates and LED mounting plates are NOT interchangeable.* Aluminum Body is Not Magnetic MMP-F150-2013-LED Steel Plate is Magnetic Applications: Hunting, fishing, off-roading, property management, security, search and rescue, farming operations and any other applications for which a roof mounted spotlight is needed for 2013 model year Ford F150 aluminum body truck owners. *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* Color Options White Grey Black At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information MMP-F150-2013-LED Magnetic Mounting Plate for Spotlights Ratings/Features: Type: Magnetic Mounting Plate Durable Construction Compatible Truck Models: Ford F-150 Model Year 2013 Steel Mounting Plate & Aluminum Bracket Frame Material: Aluminum Works with Any Magnetic Mount Light Mounting Plate Material: Steel Weatherproof Seal Bracket Material: Aluminum Made in the USA Weight: 8 lbs Windload: Highway speeds Special Orders- Requirements Weight Capacity: 20 lbs Contact us for special requirements Installation: Via Rear Cab Lights Toll Free: 888-325-4448 Seal: Weatherproof Compatible Spotlights: Any Magnetic Mount Light of up to 20 lbs E-mail: [email protected] *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* -Scroll Down to Purchase-