Larson Electronics 2007 Ford F150 No Drill Antenna Permanent Mounting Plate - 3rd Brake Light High Mount

Made in Texas The VMP-AM-F150-2007 from Larson Electronics is a Permanent Antenna Mounting Plate that allows operators to install up to four antennas on their 2007 Ford F150 steel body trucks without drilling any holes. This antenna mounting plate is ideal for law enforcement, DOT workers and anyone else who needs to easily mount an antenna, but doesn`t want to drill holes in their truck. This lightweight mounting plate allows operators to mount antennas on their trucks without drilling into the body of the truck itself. This mounting plate can support antenna arrays of up to 20 lbs. The VMP-AM-F150-2007 features four predrilled 1/2" holes for antenna mounting and is compatible with 2007 Ford F-150 steel body pickup trucks. *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* Click image to Enlarge Click image to Enlarge The VMP-AM-F150-2007 is constructed in Texas from durable aluminum for the frame, brackets and the mounting plate surface. This mounting plate has been designed for 2007 model year and newer Ford F-150 steel body pickup trucks and offers operators a sturdy and reliable platform to deploy permanent mount CB antennas, radio antennas and antennas from other equipment on the top of their truck for optimal performance. The VMP-AM-F150-2007 is installed via the rear cab lights and has a weatherproof seal on the back side for secure, dry installation and protection against scrapes to the body of the truck. The mounting plate requires absolutely no drilling for installation and is powder coated for added durability, can support up to 20 lbs and is offered in a black, white, or grey finish. The VMP-AM-F150-2007 also features a windload okay for highway speeds. (User provided equipment may vary.) *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* Installation of Lights/Equipment: The VMP-AM-F150-2007 comes predrilled with four 1/2" holes that allow for the secure mounting of various antennas. Depending on the number of holes required for mounting various types of antennas, this mounting plate can hold up to four antennas. Then the entire assembly can be mounted to the truck via the third brake light as explained below. Truck Installation: The VMP-AM-F150-2007 is easy to install and requires absolutely NO drilling to mount to the truck. This mounting plate installs via the 3rd brake light on 2007 model year Ford F150 pickup trucks between the body of the truck cab and the light. Operators simply remove their 3rd brake light, position the mounting plate bracket and reinstall the light through the bracket. Having a reverse camera in the 3rd brake light (NOT in the tailgate or bumper) will change the mounting bracket design. Those with a camera must choose the "camera" option in order to get the correct design. Please choose the appropriate option below. *Please note that the VMP-AM-F150-2007 is designed for trucks with incandescent 3rd brake lights ONLY. Operators with LED 3rd brake lights will require the VMP-AM-F150-2007-LED. Incandescent mounting plates and LED mounting plates are NOT interchangeable.* Steel Body VMP-AM-FSD-2017-LED Aluminum Plate For Mounting Permanent Mount Antennas Applications: Hunting, fishing, off-roading, property management, security, search and rescue, farming operations, law enforcement, DOT and any other applications for which a roof mounted antenna is needed for 2007 model year Ford F150 steel body truck owners. *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information VMP-AM-F150-2007 Mounting Plate for Antennas Ratings/Features: Type: Mounting Plate Durable Construction Compatible Truck Models: Ford F-150 Model Year 2007 Aluminum Mounting Plate & Bracket Frame Material: Aluminum Works with Most Antennas Mounting Plate Material: Aluminum Weatherproof Seal Bracket Material: Aluminum Made in the USA Weight: 3 lbs Windload: Highway Speeds Special Orders- Requirements Weight Capacity: 20 lbs Contact us for special requirements Installation: Via Rear Cab Lights Toll Free: 888-325-4448 Seal: Weatherproof Compatible Spotlights: Any Permanent Mount Antenna of up to 20 lbs E-mail: [email protected] *PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE`S YEAR, MAKE, MODEL, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.* -Scroll Down to Purchase-