Larson Electronics 20 Watt Industrial LED Signal / Indicator Light - Non-Metallic Fiixtures - Corrosion Resistant

Made in the USA The WAL-TL-2X10W-C Chemical Resistant LED Traffic Light from Larson Electronics is chemical resistant and approved for use in wet locations and marine environments. This waterproof LED equipped light is designed for use in general work areas that require stop and go indicators. The powerful and durable WAL-TL-2X10W-C LED light from Larson Electronics is an ideal indicator lighting solution for most general work areas requiring stop and go indicator lights. The housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globes, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED traffic lamp has a 50,000 hour operational life and is available in 120-277V AC or 11-25V AC/DC configurations for high or low voltage operation. This general work area LED light has a -29¡C to 40¡C (-29¡F to 104¡F) operating temp range. The WAL-TL-2X10W-C carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. Power is provided by two cords equipped with straight blade plugs to allow independent operation of each lamp, making this unit ideal for fuel depots where stop and go indicators are necessary. This LED light carries UL and CSA certification, USCG acceptance, approved for wet locations in any orientation, UL 595 approval for marine environments, and NEMA 4X compliance for hose down areas. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This general area LED fixture is configured for dual colored light output (one lamp each color). Color options include red, white, blue, amber, green, and purple. It offers exceptional lumen output, a 50,000+ hour life span, and the lamps are protected by Pyrex globes and polycarbonate globe guards. The LED lamps in this traffic light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. The WAL-TL-2X10W-C is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal, and is ideal for locations where these hazardous compounds are commonly encountered. Mounting is provided by a heavy gauge aluminum base with four predrilled holes designed to be bolted to walls and flat surfaces for permanent and secure attachment. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. Voltages: 120-277VAC 50/60Hz or 11-25V AC/DC At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information WAL-TL-2X10W-C Ratings/Approvals Lamp Type: LED United States & Canada Colors: Red & Green, Red & White, Red & Blue, Red & Amber, Red & Purple, White & Blue, White & Green, White & Amber, White & Purple, Blue & Green, Blue & Amber, Blue & Purple, Amber & Green, Amber & Purple, Green & Purple UL 595: Outside Marine Watts: 10 Watts Per Lamp - 20W Total UL 1570/1571: Wet Locations Voltage: 120-277V AC 50/60 Hz or 11-25V AC/DC NEMA 4X Lighting Configuration: Strobe light or Steady Burn CSA Approved Lamp Life: 50,000+ Hours USCG Accepted Mount: Predrilled Aluminum Base New York City Department of Buildings Approved Mounting: Ceiling, Wall, Flat Surface Material meets UL 94-V-0 standards for flame retardancy Operating Temperature: -29¡C to 40¡C (-29¡F to 104¡F) Special Orders- Requirements Warranty: YES - 3 Years* Contact us for special requirements Toll Free: 1-800-369-6671 Fax: 1-903-498-3364 E-mail:[email protected] Scroll Down to Purchase-