Larson Electronics 15KVA Power Substation - 600V to 208Y/120V 3PH - Female Cam-locks Line Out - Powder Coated White

Made in Texas The Larson Electronics MPD-15KVA-600-208Y.120.50A-CMLK-MOD1 power distribution substation converts three-phase 600VAC electrical current into three-phase 208Y/120VAC. This powder coated white unit provides operators the ability to safely tap into and distribute 600VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-15KVA-600-208Y.120.50A-CMLK-MOD1 portable power distribution system gives operators the ability to power their 208Y/120V equipment from a single system. On the primary side, operators connect 600 volt line-in power via a customer provided cord. On the secondary side, operators connect to one set of female cam-loks (black, red, blue, white, green) for 208Y/120V equipment. Operation: A customer provided line-in cord brings 600V three phase power to the NEMA 3R 30-amp 600V three phase primary disconnect, which contains three 20-amp time delay fuses, and passes power through to the transformer. The NEMA 3R 15 KVA transformer converts 600V to 208Y/120V three phase and passes the current to the secondary side. The secondary side of the transformer feeds a NEMA 3R 50-amp 250V three phase breaker enclosure. This breaker enclosure on the secondary side contains one set of 150-amp 600V rated E1015 female cam-loks (black, red, blue, white, green). Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this powder coated white unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4x equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-15KVA-600-208Y.120.50A-CMLK-MOD1 Power Transformer Ratings Line-In Cord: Customer Provided Max OCP PDU/Primary: 20A @ 600V Line-In Cord Cap: Customer Provided Max Secondary Output: 41.6A @ 208V Primary Voltage: 600V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 600V 3PH 30A N3R Fused @ 20A NEMA 3R Indoor or Outdoor Use Primary Protection: Disconnect, Time Delay Fuses Made in the USA Transformer: 15KVA 600V to 208Y/120V 3PH 60Hz N3R Secondary Voltage: 208Y/120V 3PH Secondary Enclosure: 250V 3PH 50A Breaker Enclosure N3R Secondary Breakers: 250V 3P 50A Breaker Secondary Line-Out: (1 Set) 150A 600V Rated E1015 Female Cam-loks [Black, Red, Blue, White, Green] Secondary Protection: Circuit Breaker, N3R Special Orders- Requirements Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder Coated Steel Frame - White Toll Free: 888-325-4448 Dimensions: 48"L x 44"W x 60"H Intl: 1-214-616-6180 Weight: 550 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase