Larson Electronics 15KVA Portable Distribution Panel - 480V to 208Y/120V 3PH - (10) 5-20R GFCI Duplex - No Tires

Made in Texas The Larson Electronics MGL15-480-120-10X120.20 power distribution substation converts three-phase 480V AC electrical current into three-phase 208Y/120V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use The MGL15-480-120-10X120.20 portable power distribution system gives operators the ability to power their 120 volt equipment from a single system. On the primary side, operators connect 480 volt using 25` of #12 SOOW cord. On the secondary side, operators connect to ten 5-20R GFCI duplex receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: A 25` #12 SOOW cord brings 480V three phase power to the NEMA 3R 30-amp 480V three phase primary disconnect, which contains three 20-amp time delay fuses, and passes 480V three phase through to the transformer. The NEMA 3R 15KVA transformer converts 480V three phase power to 208Y/120V three phase and passes the current to the secondary side. The secondary side of the transformer contains a NEMA 3R 100-amp 208Y/120V three phase main lug only panel. This secondary side contains ten 20-amp 1-pole 125V breakers protecting ten 20-amp 125V 5-20R GFCI duplex receptacles. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style, frame resulting in an extremely stable, durable, and mobile power distribution platform. A dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL15-480-120-10X120.20 Power Distribution Ratings Line-In Cord: 25` #12 SOOW Cord Max Primary OCP: 20A @ 480V Line-In Cord Cap: - Max Secondary Output: 41.6A @ 208V Primary Voltage: 480V AC 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 30A 480V 3PH Fused @ 20A N3R NEMA 3R Indoor / Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - No Flat Tires Primary Protection: Disconnect Switch, Time Delay Fuses Transformer: 15KVA 480V to 208Y/120V 3PH 60Hz N3R Secondary Voltage: 208Y/120V AC 3PH Secondary Disconnect: - Secondary Panel: 100A 208Y/120V 3PH MLO N3R Secondary Breakers: (10) 20A 1P [125V] Secondary Receptacles: (10) 20A 5-20R GFCI Duplex [125V] Special Orders- Requirements Secondary Protection: Breakers, Weatherproof Covers, GFCI Contact us for special requirements Form Factor: Powder Coated Steel Dolly Cart, No Tires Phone: 1-214-616-6180 Frame Materials: Powder Coated Steel Frame Toll Free: 888-325-4448 Dimensions: W-40" X D-40" X H-48" Fax: 1-903-498-3364 Weight: 350 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*Scroll Down to Purchase