Larson Electronics 150 Watt Portable LED Work Area Light -IP68- Aluminum Frame - Adjustable Light Head - 120-277VAC

The WAL-TFM-150LED-100 Portable LED Light from Larson Electronics is a versatile LED work light that produces 21,000 lumens of light while drawing only 150 watts. The IP68 rated WAL-TFM-150LED-100 is ideally suited for wet environments that need a portable work light. With its excellent energy efficiency it is the perfect upgrade option from bulky and higher maintenance cost older fixtures. The WAL-TFM-200W-LED-100 portable LED work light provides 9,500+ square feet of work area coverage with 21,000 lumens of light output. This portable LED light is mounted to a lightweight aluminum base and has an LED light head measuring 16 inches in diameter. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating areas and hazardous locations where flamable vapors, gases, water and dusts may be present Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge This WAL-TFM-150LED-100 is multi-voltage capable and can be operated with 100-277 VAC, 50/60Hz without any need for a special ballast. The aluminum body, hardened glass lens, and solid state LEDs give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 21,000 lumens with a color temperature of 5600K and a color rendering index of 70 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The aluminum body and LED luminaries give the WAL-TFM-150LED-100 excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED light fixture produces 21,000 lumens of light with a color temperature of 5600K and a color rendering index of 70 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The LEDs used in this light use less energy and create less heat which results in energy costs being lowered by the amount of electricity needed to both illuminate and cool large areas Application: The WAL-TFM-200W-LED-100 is ideally suited for any environment, including wet environments, that a directional and portable LED work light can be used in. The solid frame allows the operator the ability to maneuver the WAL-TFM-150LED-100, or leave it stationary as needed. The applications for this portable LED work light are varied; warehouses, off-site work locations, construction, concrete, temporary lighting, industrial portable lighting, and any applications that need portable lights, work in the dark or at night. Frame: This portable LED work light is comprised of a 16 inch LED light head mounted in a tubular frame pedestal fabricated from lightweight aluminum with a convenient carrying handle built into the top of the frame. The lamp can be easily adjusted 360¡ for precise beam positioning and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Wiring: The WAL-TFM-200W-LED-100 runs on 120-277 VAC 50/60 Hz. Included with this LED light is 100 feet of SOOW cable terminated in your choice of the 5-15 straight blade plug, the L5-15 twist-lock plug, or the international schuko plug. Choose your cord configuration below. Plug Types:Schuko--These sockets form a cavity into which the plug is inserted and the Schuko plugs and sockets are symmetric AC connectors. As with most types of European sockets, Schuko sockets can accept Europlugs. Schuko plugs are considered a very safe design when used with Schuko sockets, but they can also mate with other sockets to give an unsafe result. Nema L5-15 twist-lock--Once pushed into the receptacle, the plug is twisted and its now-rotated blades latch into the receptacle. To unlatch the plug, the rotation is reversed. The locking coupling makes for a more reliable connection in commercial and industrial settings, where vibration or incidental impact could disconnect a non-locking connector. 5-15 standard wall plug--This 2-prong plug and socket design, with two flat parallel non-coplanar blades and slots, is used in most of North America and on the east coast of South America on lamps; consumer electronics such as clocks, radios, and battery chargers; and other double insulated small appliances that don`t require grounding Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% lumen retention, which is far longer than incandescent or fluorescent lamps. The end result is more light with less heat and longer LED life. Made in USA Quality Superior LED Benefits 1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MH.5. Retains 80% lumen output after 60,000 operating hours.6. Powder coated aluminum fixture body. 7. Multiple Mounting Options Including Pendant, Wall, Ceiling, Cable Mounting and Swivel Bracket.8. Low profile - Light weight9. 21,000 Lumen output from only 150 watts 1. 60,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information WAL-TFM-150LED-100 Portable Led Work Light Summary Lamp Type: LED Low amp draw Dimensions: 15.748"-W 13.779"-H 5.044"-D Long lamp life Total Watts: 150W UL 595 Rated for Marine Use Lumens: 21,000 LEL Approved Amp Draw: 1.34 @ 120V AC Rated IP 68 Voltage: Multi- 100-277 VAC, 50/60Hz Lighting Configuration: Flood Pattern Special Orders- Requirements Weight: 30lbs Contact us for special requirements Temp Rating: T5 -40¡C to +65¡C Toll Free: 888-325-4448 Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K Intl: 1-214-616-6180 Lamp Life: 60,000+ Hours Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase-