Larson Electronics 15 KVA Temporary Power Distribution - 480V Transformer - (12) 120V GFCI Outlets - 18" Above Ground

Made in Texas The Larson Electronics MGL-60C-480-15K-120-208Y-12X20 Temporary Power Distribution System converts 480 VAC three phase electrical current to 120V AC and 208Y AC 60hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. Designed for aircraft hangar applications, all components are mounted at a minimum height of 18 inches from the ground. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGL-60C-480-15K-120-208Y-12X20 temporary power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power distribution system for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This portable transformer is designed to operate with 480v, three phase, 60hz which it then steps down to 1ph 120 VAC and 3ph 20Y VAC. The power distribution system on this portable substation makes 120VAC available via twelve 20A, 120V GFCI protected 5-20 duplex receptacles with weatherproof covers. Description: This unit is 60` of Type-W line in power cord and a Crouse-Hinds NPJ-3484 to connect the substation to a primary 480v 3ph primary power supply. A fused disconnect provides primary line protection and supplies primary power to the 15kva transformer. Secondary current is wired to a 120/208Y, 3 phase, 100 amp load center with main breaker for circuit protection. 120V line out protection is provided by twelve 20amp, 125 Volt, 1 pole breakers. Connection for 120V is through receptacles mounted on the side of the load center. Receptacles include twelve 5-20 120v, GFCI waterproof duplex receptacles. The load center is mounted within Nema 3R enclosure. The transformer and load center/distribution assembly is mounted to a standard steel dolly cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. All components are mounted 18 inches from the ground. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150kva and can be equipped with skids or trailer mounted. Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; aircraft hangars, construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL-60C-480-15K-120-208Y-12X20 Temporary Power Distribution System Ratings Line-In: 60` #6 Type-W Cable UL 1640 Portable Power-Distribution Equipment Line-In Cord Cap: Crouse-Hinds NPJ-3484 or compatible plug NEMA 3R Indoor or Outdoor Use Primary Voltage: Three Phase, 480 VAC 60Hz Made in the USA Disconnect: 30A 480V AC, 3PH - Fused at 20A 18" Above Ground Transformer:15 KVA 480 120/208Y Secondary Panel: 100A Main Breaker 120/208Y Special Orders- Requirements Secondary Breakers: (12) 20A Breakers Contact us for special requirements Form Factor:Powder Coated Steel Dolly Cart w/ Run Flat Tires Toll Free: 888-325-4448 Dimensions: W-40" X D-40" X H-48" Weight: 350lbs E-mail: [email protected] Max Primary OCP: 18 amps @ 480V Max Secondary OCP: 41 amps @ 208Y Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase