Larson Electronics 15 kVA Rack Mounted Isolation Transformer - 400V Delta - 208V Delta - 30 Amp Circuit Breaker - 50/60Hz - Pin & Sleeve Inlet Plug/Twistlock Receptacle MT-RMU-20U-ISX-400D-15KVA-208D-M1

The MT-RMU-20U-ISX-400D-15KVA-208D-M1 from Larson Electronics is a Three Phase Rack Mounted Isolation Transformer that is powerful, reliable,and designed with the environment in mind. Suitable for server rack applications, the MT-RMU-20U-ISX-400D-15KVA-208D-M1 provides increasedreliability, higher efficiency, protection against critical equipment failures, and an extra level of protection by isolating the power source from the connected device. The lower operating costs, lower heat emissions, and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. The MT-RMU-20U-ISX-400D-15KVA-208D-M1 is a 20 rack unit (20U).

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Transformer Features: The MT-RMU-20U-ISX-400D-15KVA-208D-M1 isolation transformer is a three phase unit with a 15 kVA rating and a primary voltage of 400 V Delta. It also provides a secondary voltage of 208 V Delta. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology.

This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The powder coated steel enclosure is black in color, rated NEMA 1, and issuitable for mounting in a server rack mount of at least 20U. Four low profile handles on the front of the enclosure make installation and removal a simple task while still allowing server rack doors to close. The MT-RMU-20U-ISX-400D-15KVA-208D-M1 features a 220¡C insulation with a 150¡C temperature rise.

Benefits: The MT-RMU-20U-ISX-400D-15KVA-208D-M1 isolation transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electricallybalanced to minimize axial forces during short circuit situations.

This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership.

Protection: The primary side of the MT-RMU-20U-ISX-400D-15KVA-208D-M1 is protected by a 30 amp C-curve circuit breaker. This thermal magnetic three pole circuit breaker provides a layer of protection against power surges and start-up amp draw. It has a short circuit capacity of 10 kA and a maximum switching frequency of 360 per hour.

Safety: The MT-RMU-20U-ISX-400D-15KVA-208D-M1 is an isolation transformer which means that it provides operators with an increased level of protection against electric shock. An isolation transformer can also suppress electrical noise in sensitive devices and transfer power between two circuits which must not be connected. The MT-RMU-20U-ISX-400D-15KVA-208D-M1 achieves these safety features by seperating or "isolating" the powered device from the power source and insulation between the primary and secondary power sources.

Mounting: This rack mounted transformer is designed to be mounted inside server racks. The MT-RMU-20U-ISX-400D-15KVA-208D-M1 is a 20U unit which allows it to fit in a server rack mount at least 20U tall. The front located handles assist in inserting and removing the transformer while having a low enough profile to allow server rack doors to close.

Wiring/Connections: The MT-RMU-20U-ISX-400D-15KVA-208D-M1 features a 32-amp 432B6W inlet pin and sleeve connector for making 400 V Delta primary connections. The output side is equipped with a 50-amp CS8369 female twistlock receptacle to allow for 208 V Delta output connections.

Applications: Server rack isolation transformer applications.

Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or [email protected] to discuss your specific requirements.