Larson Electronics 120W Magnet Mount LED Light Bar - (12) 10W LEDs - 10320 Lumens - 90-305V AC or 127-431V DC

Buy American CompliantThe LEDP10W-120ET-M-50-1227 from Larson Electronics is a Magnetic Mount LED Light Bar that is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. The LEDP10W-120ET-M-1227 offers 10,320 lumens of light output with low amp draw, 50,000 hour service life and 90-305V AC or 127-431V DC volt compatibility that provides operators with a versatile and powerful LED lighting solution.The LEDP10W-120ET-M-50-1227 Magnetic Mount LED light bar from Larson Electronics produces 10,320 lumens of bright light while drawing only 120 watts and 1 amp from a 120 volt electrical system. Twelve CREE XLamp MC-E¨ ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 1150` long by 220` in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. These magnetic mount LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination.LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This photo shows an open field illuminated only by ambient light at approximately 9:00 pm.This is the `Larson Electronics` sign approx. 700` away. Typically, flood lights do not reach long distances, however, the LEDP10W-120ET-M-1227 reaches the 700 foot mark easily.Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Durability: As well as unparalleled heat control, the LEDP10W series of LED light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E¨ LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.Adjustable Mounting: The trunnion wall mounting design on the LEDP10W-120ET-M-1227 allows for post-installation angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system you can view here for even greater mounting versatility.Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V RatedL5-15 Twist Lock Plug15 Amp / 125V RatedL6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail WiresWiring/Plug: This general use magnetic mount LED light bar is equipped with 50 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.LEDP10W-120ET-M-50-1227 40¡ Flood Beam(Opt) LEDP10W-120ET-M-50-1227 20¡ Wide Spot Beam(Stnd) CONDITIONS Vin min (V) = 9toff (us) = 2.9Vin nom (V) = 12R1 (kohm) = 50.2Vin max (V) = 50L1 (uH) = 3.0Vo min (V) = 6.5L-Pk (A) = 2.9Vo nom (V) = 6.8L-rms (A) = 2.9Vo max (V) = 7Ipk (A) = 2.5I-LED (A) = 2.2R2 (ohm) = 0.10Efficiency = .85I-FET (A) = 2.2fsw nom (kHz) = 150fs min (kHz) = 77Ts nom (us) = 6.666667 fs max (kHz) = 301Base frequency-= 36~37Khz @ 12VAmplitude of pulse width-= 27MsOutside: External dimmer-= 500Hz Inside : Current sensing from- 77KHz at 12V to 300KHz at 50V At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information LEDP10W-120ET-M-50-1227 LED Magnetic Mount Light Internal LED Driver FeaturesLamp Type: CREE XLamp MC-E¨ LEDFast average current controlDimensions: 20.25"L x 2.5"H x 3.5"DProgrammable off-time switching Weight: 8 lbsLinear dimming input Watts: 120PWM dimming input Led Drive %: 90%Short protection w/ Skip modeVoltage: 90-305V AC or 127-431V DCAmbient Op Temp -40¡C to +125¡CSpot Beam: 825`L x 120`WShort protection w/ Skip modeFlood Beam: 225`L x 240`WPin-compatible with the HV9910BLighting Configuration: 20¡ Spot or 40¡ Flood View Avg-Mode Driver Control PDFMounting: Magnent MountCE Certified Wiring: 50` 16/3 SOOW Cord w/ General Area Cord CapCord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, PigtailAmps: 1 amp (on 120 volts) 2.31 amps (on 277 volts) Lumens: 10,320LED Light Color: 6000KLED Life Expectancy: 50,000 hoursOptics Efficiency: 90%Special Orders- RequirementsMaterials: Aluminum Housing, Polycarbonate LensContact us for special requirements Housing Colors: Black or WhiteToll Free: 1-800-369-6671Flood Beam: Lux @ 1 meter= 24,000 @ 3 meters= 3,850 Intl: 1-903-270-1187Spot Beam: Lux @ 1 meter= 31,500 @ 3 meters= 6,550E-mail:[email protected] Scroll Down to Purchase-