Larson Electronics 10W Vapor Proof LED Fixture - 100-277V AC - Replacement for 100W Incandescent - IP65

The VPL-MJ-10W-LED-WCM Vapor Proof LED Fixture from Larson Electronics is designed for rugged work sites and wet locations. The 10-watt fixture is dimmable and operates on 100-277V AC. Made out of heavy-duty, die cast aluminum with a clear, glass globe lens, the unit is offered in the following mount options: Wall, Pendant or Box. The VPL-MJ-10W-LED-WCM is a rugged lighting solution for outdoor and commercial spaces. The 10-watt lamp operates on 100-277 V AC 50/60hz, 11-25V AC/DC, or 127-300V DC and supports dimming functionality. During operation, the LED fixture emits 1050 lumens of white light with a color temperature rating of 5,000K in a flood beam configuration. This lamp is an ideal replacement for 100 to 150 watt incandescent fixtures. This vapor proof LED light is constructed of die cast aluminum with a powdercoat finish over a chromate conversion coating and a clear, glass globe lens. As a luminary designed for outdoor use, the IP65-rated unit is listed for wet locations. The VPL-MJ-10W-LED-WCM features a directional LED light bulb that can serve as an A19 LED upgrade from standard light bulbs fitting E26 bulb sockets. Utilizing only 10 Watts and designed to operate with 100-277 Volts AC, 11-25Volts AC/DC, or 127-300V DC, this LED blub provides higher efficiency than traditional incandescent A19 bulbs and is a direct fit replacement. The A19 is the same base and dimensions as a standard A19 incandescent light bulb, meaning you can use this LED light bulb as a replacement for a standard household incandescent and compact fluorescent bulbs. However, given the durability and longevity of this LED design, we see this LED light bulb as an ideal solution for a variety of business and industrial uses. This caged LED has an acceptable operating temperature range of -40C to 40C and an operational life of 50,000 hours. The solid state design of this lamp means it is resistant to the effects of impacts and vibrations, providing adding durability to withstand conditions that would cause a normal incandescent bulb to fail. The overall dimensions of the LED light are the same as a standard A19 incandescent lamp, and the base is constructed of aluminum for durability and resistance to rust and corrosion. The included bulb produces nearly 20% more light at 5 feet than a standard 100 watt rough service bulb. Combined with a "cool white" color output, this bulb is ideal for improving the light output of hand lamps, drop lights, and other standard incandescent lighting within industrial applications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Mounting: The VPL-MJ-10W-LED-WCM features a selection of 3/4" NPS threaded mounts. The height of the LED lamp may vary, based on the type of mount selected: Box (15" x 7.125"), Pendant (14.75" x 7.125") or Wall (18.25" x 7.125"). The recommended mounting height for this unit ranges between 8` and 12`. Suggested Applications: Outdoor lighting, retail spaces, lobbies, commercial locations, industrial parks, schools, public transportation hubs, airports, office buildings, medical centers and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information VPL-MJ-10W-LED-WCM Vapor Proof LED Lamp Ratings/Approvals Lamp Type: LED Vapor Proof Dimensions: 15" x 7.125" (Lamp w/ Box Mount) Listed for Wet Locations Weight: - Replacement for 100-150W Incandescent Voltage: 100-277 V AC 50/60hz, 11-25V AC/DC, or 127-300V DC Dimmable Watts: 10W IP65 Lumens: 1050 Luminous Efficacy: 105 lm/w Lamp Life Expectancy: 50,000+ Hours Color Temp: 3000K, 4000K, 4300K, 5000K, 6000K, Blue, Amber, Red, Green Beam Angle: Flood Ambient Operating Temp Range:-40¡C to +40¡C Housing Material: Die Cast Aluminum Special Orders- Requirements Finish: Powdercoat Finish over Chromate Conversion Coating Contact us for special requirements Lens Material: Clear, Glass Globe Toll Free: 888-325-4448 Mounting: Wall, Pendant or Box Color: Gray E-mail: [email protected] Down to Purchase