Buy American Compliant The LED10W-1S-40C LED Light is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. This ultra compact LED light produces a 900 lumen output with low voltage and amp draw, 50,000 hour service life and 9 to 48 volt compatibility providing operators with a versatile and powerful LED lighting solution. The LED10W-1S-40C LED light emitter from Larson Electronics produces 900 lumens of bright light while drawing only 10 watts @ .8 amp from a 12 volt electrical system. A single Seoul Z-Power¨ 10 watt LED producing 900 lumens is combined with high purity optics to produce a 10 degree spread spot beam approximately 225 long by 45 in width. We also offer floodlight versions with a 35 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. This particular unit is ultra compact at only 2 inches wide by 3.2 inches tall, by 2.5 inches deep, which makes it ideal for applications where electrical power and mounting space is at a premium. Another unique feature of this LED light is that the side brackets enable the operator to connect multiple units together. Thus, operators can combine any number of units to achieve the power and dimensions required for most any application. The LED10W series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. A small profile, low power requirements, high durability and versatile mounting makes these LED lights ideal for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, offroading and commercial structure illumination. This photo shows an open field illuminated only by ambient light at approximately 9:00 pm`. This photo shows the LED10W-1S-40C, spot, illuminating that field. The beam reaches the object in the distance positioned at 250 feet. This particular photo shows the LED10W-1S-40C in flood configuration. Notice a more abundant amount of light, closer to the fixture. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Seoul Z-Power¨ Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED10W series LED lights can operate on current ranging from 9 to 50VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems dont always operate with 12 volts and external generators, transformers or inverters are impractical. Wiring: This unit includes 40ft of 16/2 SOOW Cord. The light has 2" pigtail with a female Deutsch IPD / LADD DT04-2P connector at the end, and a 40ft harness with mating male Deutsch IPD / LADD DT06-2S connector and blunt cut ends on the other end of cable. Durability: The LED10W series of LED light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand frigid temperatures, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp¨ LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Mounting: Suspended on top of an adjustable u-bracket, this LED light can be adjusted and tightened into any position to suit your application. A single stud protrudes from the bottom of the u-bracket mount, enabling the operator to install the light using a simple through hole mount. In other words, the light can be installed anywhere a 1/4 inch hole can be drilled. LEDP10W-1S 35¡ Flood Beam(Opt) LEDP10W-1S 10¡ Wide Spot Beam(Stnd) Specifications / Additional Information LED10W-1S-40C LED Light LED10W-1S-40C Features Lamp Type: Seoul Z-Power¨ LEDs Seoul Z-Power¨ LEDs Dimensions: 2"W 3.2"-H 2.5"-Depth Low Amp Draw Watts: 10 Small Size Led Drive %: 80% 50,000 Hour Service Life Voltage: 9-48 VDCShock Vibration Resistant Spot Beam: 225`L x 25`WAmbient Op Temp -45C to 85C Flood Beam: 45`L x 40`WPin-compatible with the HV9910B Lighting Configuration: 10¡ Spot or 35¡ Flood Multi-Unit Connectable Mounting: Adjustable U-Bracket Wiring: 2" Pigtail w/ Female Deutsch / 40ft Harness of 16/2 SOOW Cord w/ Mating Male Deutsch & Blunt Cut Ends Amps: .8 (on 12 volts) Lumens: 900 Special Orders- Requirements LED Light Color: 6000K Contact us for special requirements LED Life Expectancy: 50,000 hours Toll Free: 1-800-369-6671 Optics Efficiency: 90% Materials: Aluminum Housing, Polycarbonate Lens E-mail:[email protected] Weight: 13 Ounces Housing Colors: Black or White CE Certified EN55015 EMIEN61547 EMSEN62471 Photobiological Safety 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-
Larson Electronics 10W LED Light - 900 Lumens - 2" Square - Stud Mount - 9-48V - 40ft 16/2 SOOW Cord w/ 2" Pigtail
Larson Electronics
(No reviews yet)
Write a Review
Write a Review
Larson Electronics
Larson Electronics 10W LED Light - 900 Lumens - 2" Square - Stud Mount - 9-48V - 40ft 16/2 SOOW Cord w/ 2" Pigtail
- SKU:
- LED10W-1S-40C
- UPC:
- Weight:
- 0.00 LBS
Larson Electronics
Larson Electronics LED light - 3 Watt - 2" square - Stud Mount - Color LEDs
!