Larson Electronics 100KVA Power Distribution - 480V to 120/240V !PH - (12) 50A & (12) 20A - Cam-locks Input/Output

Made in Texas The Larson Electronics MPD-CMLK-480V-100KVA-120.240V-12X50A-12X20A-CMLK power distribution substation converts 480V AC single phase electrical current into 120/240V AC single phase. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MPD-CMLK-480V-100KVA-120.240V-12X50A-12X20A-CMLK portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 480V AC single phase via one set of male cam-locks (brown, yellow, green). On the secondary side, operators connect to one set of female cam-locks (black, red, white, green) for 120/240V equipment, to twelve CS6369 receptacles for 120/240V equipment and to twelve 5-20R GFCI duplex receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: One set of 400-amp, 600V-rated E1016 male cam-loks (brown, yellow, green) brings 480V single phase power to a 400-amp, 480V three phase primary disconnect, which contains 250-amp time delay fuses, and passes power through to the transformer. The NEMA 3R 100KVA transformer converts 480V single phase power to 120/240V single phase and passes the current to the secondary side. The secondary side of the transformer feeds one NEMA 3R 400-amp, 120/240V single phase secondary main circuit breaker panel and two NEMA 3R 400-amp, 120/240V single phase secondary main lug only panels. This secondary side contains one set of 400-amp, 600V-rated E1016 female cam-locks (black, red, white, green), twelve 50-amp, 2-pole, 250V breakers protecting twelve 50-amp, 125/250V CS6369 receptacles, and twelve 20-amp, 1-pole, 125V breakers protecting twelve 20-amp, 125V 5-20R GFCI duplex receptacles. Cam Locks Cam Locks Disconnect Cam Lock Fuse Click Images to Enlarge Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-CMLK-480V-100KVA-120.240V-12X50A-12X20A-CMLK Power Distribution Ratings Line-In: (1 Set) 400A 600V Rated E1016 Male Cam-loks [Brown, Yellow, Green] Max Primary/PDU OCP: 225A @ 480V Line-In Cord Cap: - NA Max Secondary Output: 400A @ 240V Primary Voltage: 480V AC 1PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: 400A 480V 3PH N3R Fused @ 250A NEMA 3R Indoor / Outdoor Use Primary Panel: - N/A Made in the USA Primary Breakers: - N/A Primary Receptacles: - N/A Primary Protection: Disconnect, Time Delay Fuses Transformer: 100KVA 480V to 120/240V 1PH 60Hz N3R Secondary Voltage: 120/240V AC 1PH Secondary Disconnect: - N/A Secondary Panels:(1) 400A 120/240V 1PH MCB N3R; (2) 400A 120/240V 1PH MLO N3R Secondary Breakers: (12) 50A 2P [250V], (12) 20A 1P [125V] Secondary Receptacles: (1 Set) 400A 600V Rated E1016 Female Cam-loks [Black, Red, White, Green], (12) 50A CS6369 [125/250V], (12) 20A 5-20R GFCI Duplex [125V] Secondary Protection: Circuit Breakers, GFCI, Weatherproof Covers Special Orders- Requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Intl: 1-214-616-6180 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase