Larson Electronics 100 kVA Pad Mount Transformer - 11000D Delta Primary - 415Y/240 Wye Secondary - N3R - Oil Cooled

The MT-PML-3P-11000D-100KVA-415Y.240-N3R 11000D 3 Phase Energy Efficient Dead Front Radial Feed Pad Mount Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-PML-3P-11000D-100KVA-415Y.240-N3R provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 100 kVA, the MT-PML-3P-11000D-100KVA-415Y.240-N3R transformer is a three phase unit with a primary voltage of 11000 V Delta. It also provides a secondary voltage of 415Y/240 V Wye. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be pad mounted. The unit also features FR3 mineral oil cooling, a 65¡C temperature rise and is rated IP24. The MT-PML-3P-11000D-100KVA-415Y.240-N3R is designed so that no excess oil heating occurs from unbalanced loads or phase loss on the primary side. Benefits: The MT-PML-3P-11000D-100KVA-415Y.240-N3R pad mount dead front loop feed transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-PML-3P-11000D-100KVA-415Y.240-N3R Pad Mount Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 50 Hz KNAN Cooling Class kVA: 100 IP24 Rated Primary Voltages: 11000 V Delta FR3 Mineral Oil Filled Primary Connection: Delta Dead Front Primary BIL: 95 kV Radial Feed Primary FCAN: 2 x 2.5% Primary FCBN: 2 x 2.5% Tap Changer: 100 Amp 5 Position Tap Changer Secondary Voltage: 415Y/240V Wye Secondary Connection: Wye Secondary BIL: 30 kV Primary Bushings: 200 Amp Bushing Wells with Standard Inserts and Replaceable Studs Secondary Bushings: Four-Hole Spade Bushings Fusing: Bay-O-Net Expulsion Fuse Current/Fault Sensing Spare Fuses: One Set Primary Arresters: No Arresters Accessories: Liquid Level Gauge Accessories: Dial Type Thermometer Accessories: Pressure Vacuum Gauge Accessories: Pressure Relief Diaphragm Accessories: Pressure ReliefValve Accessories: 1" Drain Valve w/ Sampler Accessories: Schrader Valve Danger Signs: Four Switches: 1 - 4 Position T-Blade Switches: 300 Amp Winding Material: Copper Efficiency: DOE Compliant Cooling Class: KNAN Insulating Fluid: FR3 Mineral Oil Elevation: Designed for Operation at 1000M (3300`) Above Sea Level Temperature Rise: 65¡C Nominal Impedance: Standard Sound Level: NEMA TR1 Standard Nameplate: EPS Standard Tank Material: Mild Steel Special Orders- Requirements Finish: Munsell 7.0 GY 3.29/1.5 Bell Green Contact us for special requirements Dimensions: - Toll Free: 888-325-4448 Weight: - Intl: 1-214-616-6180 Mounting: Pad Mount E-mail: [email protected] -Scroll Down to Purchase-