Larson Electronics 2500 kVA Pad Mount Transformer - 13800D Primary - 415Y/240 Wye Secondary - N3R - Oil Cooled

The MT-PML-3P-13800D-2500KVA-415Y.240-N3R 13800D 3 Phase Energy Efficient Live Front Radial Feed Pad Mount Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-PML-3P-13800D-2500KVA-415Y.240-N3R provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 2500 kVA, the MT-PML-3P-13800D-2500KVA-415Y.240-N3R transformer is a three phase unit with a primary voltage of 13800 V Delta. It also provides a secondary voltage of 415Y/240 V Wye. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be pad mounted. The unit also features mineral oil cooling, a 65¡C temperature rise and is rated IP24. The MT-PML-3P-13800D-2500KVA-415Y.240-N3R is designed so that no excess oil heating occurs from unbalanced loads or phase loss on the primary side. Benefits: The MT-PML-3P-13800D-2500KVA-415Y.240-N3R pad mount dead front loop feed transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-PML-3P-13800D-2500KVA-415Y.240-N3R Pad Mount Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 60 Hz ONAN Cooling Class kVA: 2500 IP24 Rated Primary Voltages: 13800 V Delta Type II Mineral Oil Filled Primary Connection: Delta Live Front Primary BIL: 95 kV Radial Feed Primary FCAN: 2 x 2.5% Primary FCBN: 2 x 2.5% Tap Changer: 5 Position Tap Changer Secondary Voltage: 415Y/240 V Wye Secondary Connection: Wye Secondary BIL: 30 kV HV Bushings: (3) Two-Hole Bushings LV Bushings: Ten-Hole Spade Bushings w/ Spade Supports & X0 Bushing w/ Removeable Ground Strap Accessories: Liquid Level Gauge Accessories: Dial Type Thermometer Accessories: Pressure Vacuum Gauge Accessories: Pressure Relief Valve Accessories: 1" Drain Valve w/ 3/8" Sampler Accessories: 1" Upper Fill Plug and Filter Press Connection Accessories: Dual Voltage Switch Winding Material: Aluminum Efficiency: DOE Compliant Cooling Class: ONAN Insulating Fluid: Type II Mineral Oil Elevation: Designed for Operation at 1000M (3300`) Above Sea Level Temperature Rise: 65¡C Ambient Temperature Rating: 30¡C Impedance (Std): Standard Sound Level: NEMA TR1 Standard Nameplate: EPS Standard Cabinet Hardware: Penta-Head Cabinet Door Bolts Special Orders- Requirements Finish: Munsell 7.0 GY 3.29/1.5 Bell Green Contact us for special requirements Dimensions: - Toll Free: 888-325-4448 Weight: - Intl: 1-214-616-6180 Mounting: Pad Mount E-mail: [email protected] -Scroll Down to Purchase-