Larson Electronics 10' Three Stage Fixed Mount Light Mast - Extends up to 10 Feet - 44" Mast Head - Electric Winch

Made in the USA The Larson Electronics LM-10-6-3S-FM-EW-350LB fixed mount 3-stage electric light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to ten feet. This light tower collapses to six feet for easy transportation, features a rotating boom that allows for 360¡ of rotation, electric winch, and a removable mast head for storing mounted equipment when not in use. This light mast can support up to a 350lb payload. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping three stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 10` for effective coverage. This light boom can be extended to 10` for maximum area coverage and collapsed to 6` for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a lower section 4.31` in length and 4" by 4" by 3/25" thick, middle section 4.65` in length and 3" by 3" by 1/8" thick, and an upper section 5.06` and 2" by 2" by 3/25" thick. Each section has a 2` minimum overlap. The mast is extended to its full height using an included 1,000 lbs electric winch with 3/16" galvanized cable. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The LM EW series of light masts from Larson Electronics features an electric winch setup to raise and lower the light mast. A NEMA 3R control box mounted at the base of the light mast houses the controls for power and up and down motions. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. These light masts are typically mounted to trailers or other stable surfaces via a 15" by 13" by 1/4" thick mounting base-plate which has been drilled to accept six 9/16" anchor bolts. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for light fixtures and equipment. The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 6`, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely, and can typically be rotated with a single hand. The electric winch on this mast is offered in 120V or 240V AC 50/60 HZ. Additional voltage options are available at an additional charge. Larson Electronics can offer single phase and three phase AC winches, or low voltage DC winches. This light tower weighs approximately 150 lbs and can easily support and lift 350 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 8` long, 4` wide, 5` tall and weighs approximately 250 lbs. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches. Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E. Specifications / Additional Information LM-10-6-3S-FM-EW-350LB - 10` Three Stage Telescoping Light Tower Quick Summary Length: Telescoping from 6` to 10` 6` to 10` Foot Light Mast Weight: +-150 lbs Steel Construction Capacity: 350 lbs Powder Coated Finish Materials: Steel Removable Mast Head Finish: Powder Coated - Gloss Blue 125 mph Wind Resistance Operation: (1) 1,000lbs Electric Winch, Manual Optional Electric Operation Cable: 3/16" Aircraft Cable UL 508A Mounting: 1/4" thick, 13" x 15" Base Plate Anchor Bolts: (6) 9/16" Bolts Special Orders- Requirements Shipping: Common Freight Contact us for special requirements Shipping Dimensions: 8`-L x 4`-W x 5`-H Phone: 1-214-616-6180 Shipping Weight: +-250 lbs Toll Free: 888-325-4448 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements Fax: 1-903-498-3364 E-mail: [email protected]