Larson Electronics 0.5KVA Outdoor Rated Transformer - Input 120 or 240V 50/60hz -12 or 24V Output - Weatherproof

Made in the USA The Larson Electronics TX-500-120-240-50-60-DC 500VA power transformer converts 120 or 240 VAC at 50/60hz to 12 or 24 VDC and is ideal for powering 12 or 24 volt based lights and equipment. This 0.5KVA(500VA), coil based power transformer accepts 120VAC or 240VAC electrical current and provides 12VDC at 41.6 amps or 24VDC at 20.8 amps per a inline rectifier via a 1` SOOW cord depending upon the chosen configuration. The transformer in this unit is encased within a weatherproof NEMA 3R rated enclosure and produces minimal interference with the wireless radio receivers often found in remote controlled lighting equipment such as Golight wireless remote controlled spotlights. The primary input on this unit accepts either 120 or 240 VAC at 50/60Hz depending upon configuration and is connected through a 5` SOOW cord. Input from this unit requires 4.2 amps at 120 Volts or 2.1 amps at 240 Volts depending upon the unit’s configuration. This unit is preconfigured for specific current input and output before shipping. Please select your desired current voltages from the drop down boxes below when ordering. Some power transformers produce significant radio frequency interference which can cause erratic operation of radio controlled devices. This NEMA 3R encapsulated transformer is ideal for use with wireless remote controlled Golight models GL-3049H, RCL360HID and any other equipment that relies on radio receivers for remote operation when mounted 2 feet or more from such equipment. This heavy duty unit measures 10” tall x 6” wide x 6” deep, is surface mountable and provides a reliable and low interference low voltage power solution for equipment requiring 12 or 24 VDC. Larson Electronics.com can build transformers to your specifications. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information TX-500-120-240-50-60 500kva Power Transformer Line In: 120VAC @ 4.2A or 240VAC @ 2.1A 1PH Line Out: 12VDC @ 41.6A or 24VDC @ 20.8A per inline rectifier KVA: 0.5 @ 50/60Hz Rating: NEMA 3R Enclosure Dimensions: 10”-H x 6”-W x 6”- D Wiring: Input- 5` SOOW Cord Output-1` SOOW Cord Mounting: Surface Mount Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*