Fluke Solar Tools Kit with 87V Max Digital Multimeter and Test Leads

Fluke Solar Tools Kit with 87V Max Digital Multimeter and Test Leads

The 87V MAX is the ideal electrical troubleshooting solution for solar inverters, combiner boxes and battery storage systems. The 87V MAX is built with an IP67 rated, industrial-strength case and a removable holster. The holster doubles as a test probe holder for easier, one-handed operation. This meter is fully waterproof and dust proof keep working reliably no matter where your job takes you. Safely connect the MC4 test leads to the meter to validate voltage from individual panels or a series of panels in a PV array.

Key functions of the solar clamp meter and MC4 test leads:

• Measure voltage of PV arrays safely and accurately
• IP67 rated meter can withstand harsh outdoor environments
• Meter is designed to survive drops up to 4-meters (13 feet)
• MC4 leads comply to IEC / EN 61010-031

Key features

 

Specifications: Fluke 87V MAX True-rms Digital Multimeter

Electrical Specifications
DC Voltage	Range	0.1 mV to 1000 V
	Accuracy	±(0.05% + 1)
	Maximum resolution	0.1 mV
AC Voltage	Range	0.1 mV to 1000 V
	Accuracy	±(0.7% + 4) true-rms
	AC bandwidth	20 kHz with low pass filter; 3 dB @ 1 kHz
	Maximum resolution	0.1 mV
DC Current	Range	0.1 _A to 10 A (20 A for 30 seconds maximum)
	Amps accuracy	±(0.2% + 2)
	Maximum resolution	0.1 µA
AC Current	Range	0.1 _A to 10 A (20 A for 30 seconds maximum)
	Amps accuracy	±(1.0% + 2) true-rms
	Maximum resolution	0.1 µA
Resistance	Range	0.1 ½ to 50 M½
	Accuracy	±(0.2% + 1)
	Maximum resolution	0.1 ½
Capacitance	Range	0.01 nF to 9999 _F
	Accuracy	±(1% + 2)
	Maximum resolution	0.01 nF
Frequency	Range	0.5 Hz to 199.99 kHz
	Accuracy	±(0.005% + 1)
	Maximum resolution	0.01 Hz
Duty cycle	Maximum duty cycle	99.9%
	Accuracy	±(0.2% per kHz + 0.1%)
	Maximum resolution	0.1%
Temperature measurement range	Ð200.0 ¡C to 1090 ¡C Ð328.0 ¡F to 1994.0 ¡F excluding probe
80 BK temperature probe	Ð40.0 ¡C to 260 ¡C, ± 2.2 ¡C or 2% whichever is greater Ð40.0 ¡F to 500 ¡F, ± 4.0 ¡F or 2% whichever is greater
Conductance	Maximum conductance	60.00 nS
	Accuracy	±(1.0% + 10)
	Maximum resolution	0.01 nS
Diode test	Range	2 V
	Resolution	0.001V
	Accuracy	±(1% + 1)
Diagnostics and data storage	Peak Min/Max	250 _S
	Min/Max/Avg	Yes
	Reading hold/Auto (Touch) Hold	Yes
	Relative reference	Yes
Display	Digital	6000 counts updates 4/second 19,999 counts in highÐresolution mode
	Analog bar graph	32 segments, updates 40/second
	Backlight	Two level
Low pass filter (VFD measurements)	Yes
Input Alert	Yes
Safety Specifications
Safety rating	IEC61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600 V, CAT III 1000 V
Agency approvals	CE, CSA
Mechanical and General Specifications
IP rating	IEC 60529: IP67
Power	Three AA batteries. 800 hours typical, without backlight
Size	6.0 x 10.1 x 21.5 cm (with holster)
Weight	698.5 g (with holster)
Warranty	Limited lifetime
Environmental Specifications
Operating temperature	-15 ¡C to 55 ¡C, to -40 ¡C for 20 minutes when taken from 20 ¡C
Storage temperature	-40 ¡C to + 60 ¡C
Humidity (without condensation)	0% Ð 90% (0 ¡C Ð 35 ¡C) 0% Ð 70% (35 ¡C Ð 55 ¡C)
Operating altitude	2000 m

 

Specifications: Pomona PVLEAD1 MC4 to 4 mm Test Lead Set

	PVLEAD1	PVLEAD3
	MC4 to 4mm Test Lead Set	MC4 Solar Clamp Meter Test Lead Set
Contact	Brass, Nickel Plated	Brass, Nickel Plated
Length	60Ó	36Ó, 12Ó
Voltage	CAT III 1000V,	CAT III 1000V,
	CAT IV 600V	CAT IV 600V
Current	20 amp	20 amp
Standards	IEC 61010-031	IEC 61010-031