Fluke Networks Pro3000 Tone Generator and Probe Kit
Pro3000 analog tone generator and probe kit uses the SmartTone technology, with five different tones for exact pair identification, and provides clear and precise tracing of communication cabling. Simply short the selected pair at the near or far end to change the cadence of the tone generated.
Key features
- Send tone signal up to 10 miles (16 km) on most cables
- Analog tone generator with bed-of-nails clips, unfiltered probe
- SmartTone provides 5 distinct tones for exact pair identification
- Continuity testing and line polarity confirmation
- Ergonomic sleek design, 3.5 mm headphone jack
| Pro3000 Analog Toner Specifications | |
|---|---|
| User interface | Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20¡ C to 60¡ C, Storage: -40¡ C to 70¡ C |
| Case dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe Specifications | |
|---|---|
| User interface | ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack |
| Battery | 9V alkaline |
| Temperature | Operating: -20¡ C to 60¡ C, Storage: -40¡ C to 70¡ C |
| Case dimensions | 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |
