Fluke 83V Average Responding Industrial Multimeter

Fluke

$442.99
(No reviews yet) Write a Review
SKU:
FLUKE-83V
Weight:
0.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Fluke 83V Average Responding Industrial Multimeter

The Best Techs Use the Best Tools

Industrial electricians around the world trust the Fluke 83V Industrial Multimeter from the control room to the plant floor. With its accuracy and troubleshooting capabilities, the Fluke 83V Industrial Multimeter works when you need it, even in loud, high energy, and high altitude locations.

Identify Complex Signal Problems Fast

When productivity is on the line and you need to solve problems fast, the Fluke 83V delivers the accuracy and advanced troubleshooting capabilities you need.

Min/Max allows capture of signal changes

  • 6000 count display resolution
  • CAT III 1000 V, CAT IV 600 V safety rated
  • Designed and built in the U.S.A.
  • The most trusted industrial multimeter in the business
  • Lifetime warranty

The Fluke 83V Ð Just One of Fluke's Trusted Tools

Fluke builds the most trusted tools in the world and that means more than just the Fluke 83V. If you work with HVAC equipment, need a small meter for small spaces or work in the electrical installer's and repairman's world, check out the full family of Fluke digital multimeters.



Key features

New features for maximum productivity

  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 83V significantly easier to read than older models
  • 6000 counts, 3-3/4 digits
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • "Classic" design with new removable holster with built in test lead and probe storage
  • Lifetime warranty

Electrical safety

All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

  • Measure AC current with an optional current clamp accessory


Specifications
Voltage DCMaximum voltage1000 V
Accuracy±(0.1% + 1)
Maximum resolution100 µV
Voltage ACMaximum voltage1000 V
Accuracy±(0.5% + 2)
Maximum resolution0.1 mV
Current DCMaximum amps10 A (20 A for 30 seconds maximum)
Amps accuracy±(0.4% + 2)
Maximum resolution0.01 mA
Current ACMaximum amps10 A (20 A for 30 seconds maximum)
Amps accuracy±(1.2% + 2)
Maximum resolution0.1 µA
ResistanceMaximum resistance50 M½
Accuracy±(0.4% + 1)
Maximum resolution0.1 ½
CapacitanceMaximum capacitance9,999 µF
Accuracy±(1% + 2)
Maximum resolution0.01 nF
FrequencyMaximum frequency200 kHz
Accuracy±(0.005% + 1)
Maximum resolution0.01 Hz
Duty cycleMaximum duty cycle99.9%
Accuracy±(0.2% per khz + 0.1%)
Maximum resolution0.1%
ConductanceMaximum conductance60.00 nS
Accuracy±(1.0% + 10)
Maximum resolution0.01 nS
DiodeRange3 V
Resolution1 mV
Accuracy±(2% + 1)
Duty cycle rangeAccuracywithin ±(0.2% per kHz + 0.1%)
Environmental Specifications
Operating temperatureÐ20¡C to +55¡C
Storage temperatureÐ40¡C to +60¡C
Humidity (without condensation)0% Ð 90% (0¡C Ð 35¡C)
0% Ð 70% (35¡C Ð 55¡C)
Operating altitude2000 m
Safety Specifications
Overvoltage categoryEN 61010Ð1 to 1000 V CAT III, 600V CAT IV
Agency approvalsCSA, T†V
Mechanical and General Specifications
DisplayDigital6000 counts updates 4/sec
Analog32 segments, updates 40/sec
Frequency19,999 counts, updates 3/sec at > 10 Hz
Size201 x 98 x 52 mm (with holster)
Weight355 g
Weigh with holster and flexÐstand624 g
WarrantyLifetime
Battery lifeAlkaline~400 hours typical, without backlight
Shock1 Meter drop per IEC 61010Ð1:2001
VibrationPer MILÐPRFÐ28800 for a Class 2 instrument

Reviews