nVent Hoffman P2RA19S18 ProLine G2 19-Inch Rack Angles, Sq Hole, 1800mm, Conductive, Steel
Furnished in pairs Can be mounted directly to the frame, or at variable depths using Adjustable Rack-Mounting Rails or Grid Straps; when mounted to the frame there is 44mm between the door opening and the Rack Angle mounting surface Single-bay Frames: in a 600-mm wide frame, Rack Angles can be mounted in-line with the frame; in an 800-mm wide frame, Adjustable Rack-Mounting Rails or Frame Reducing Brackets are required (sold separately) to achieve the 19-inch rack spacing Double-Bay Frames: in a 1200-mm wide frame, Center Uprights must be used to create a mounting surface in the center of the enclosure for either bay; in a 1600-mm frame, Center Uprights are again required in addition to Frame Reducing Brackets or Adjustable Rack-Mounting Rails to achieve the 19-inch rack spacing Tapped-Hole Rack Angles accommodate 10-32 screws for equipment mounting Square-Hole Rack Angles accept both metric and English cage nuts and screws: most commonly M5, M6, and 10-32 screws Optional Shelves, Drawers, and Guides require two sets of Rack Angles to secure within the frame All mounting hardware for Rack Angle installation into the frame is included; mounting hardware for securing rack-mount equipment/accessories to the Rack Angles is either supplied with the item or purchased separately Tapped Rack Angles are constructed from 12 gauge (2.5 mm) conductive steel, while Square-Hole Rack Angles are from 14 gauge (1.75 mm) conductive steel Load rating of 20 lbs (9.1 kg) per rack unit for equipment under 20-inches (508 mm) in depth; All equipment over 20-inches in depth requires rear rack angles for support
nVent Hoffman P2RA19S18 ProLine G2 19-Inch Rack Angles, Sq Hole, 1800mm, Conductive, Steel
nVent Hoffman
(No reviews yet)
Write a Review
Write a Review
nVent Hoffman
nVent Hoffman P2RA19S18 ProLine G2 19-Inch Rack Angles, Sq Hole, 1800mm, Conductive, Steel
- SKU:
- P2RA19S18-NV
- Weight:
- 0.00 LBS
