nVent Hoffman P2PSM186 ProLine G2 Full Side-Mounting Subpanel, 1800x600, White
Accommodates five loading options: vertical front, vertical side, vertical rear, horizontal front (frame over subpanel), horizontal rear (subpanel lowered into frame) High space efficiency ratio (HxW of subpanel)/(HxW of frame) of 84 percent Mounting subpanel is securely fastened at the top and bottom of the enclosure; subpanels less than 1200mm wide include four sets of EZ-Load Glide Blocks, four BV-M6 fasteners (block to frame) and four M12 Hex Bolts (subpanel to block); Subpanels 1200mm and greater include eight sets of EZ Load Glide Blocks, eight BV-M6 fasteners (block to frame) and eight M12 Hex Bolts (subpanel to block) to ensure wider subpanels are well supported Subpanels greater than 1000mm wide are 11 gauge (3.0 mm) mild steel, while subpanels 100mm or narrower are 12 gauge (2.5mm); conductive or white painted finish available Subpanels can be mounted at any depth in 25-mm increments (front to back); accommodates back-to-back and fully recessed rear positions Side-mount panels must be used for the sides of the enclosure; they can be installed on the interior sides of frames Optional panel support bracket available for applications requiring more support in the center of the subpanel; this is required if the enclosure will be tipped in transit or if the panel is not located at the bottom of the enclosure on the glide blocks
nVent Hoffman P2PSM186 ProLine G2 Full Side-Mounting Subpanel, 1800x600, White
nVent Hoffman
(No reviews yet)
Write a Review
Write a Review
nVent Hoffman
nVent Hoffman P2PSM186 ProLine G2 Full Side-Mounting Subpanel, 1800x600, White
- SKU:
- P2PSM186-NV
- Weight:
- 0.00 LBS
