nVent Hoffman MAS0806030R5 Single Door Enclosure with Plate, MAS, 800x600x300mm, Light Gray, Mild Steel
For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter ðð 2 mm depressions, to allow air circulation around the rear part of the enclosure Door: Surface mounted with 130-degree opening; concealed removable hinges with captive pin Door: Hinges can be mounted to allow left or right hand opening Door: inner M6 welded studs to mount door profiles MMDP Door: Sealing is ensured by an injected one piece polyurethane gasket Lock: Customized lock with double-bit for easy opening of the door Gland plate: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment Mounting plate: On the top and bottom there are holes to facilitate cable fixing Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges Delivery: Enclosure with door and mounting plate; for height 600 mm and above, two door mounting profiles; gland plate(s) with gasket(s), plastic double-bit 3 mm key, mounting accessories, metallic key, for height 1000 mm and above
UL 508A Listed; Type 4, 12; File No. E92044
cUL Listed per CSA C22.2 No.0, No.0.4, No.14, No.94; Type 12; File No. E92044
