Leviton N1303-DS Three-Pole AC Manual Motor Controller
Dielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Grounding: Grounded To Enclosure
Pole: 3
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Flammability: Rated V-0 per UL 94
Operating Temperature: -40¡C to 60¡C
Contacts: Silver-Cadmium .031 Thick
Enclosure Cover Material: Steel
Face Material: Thermoplastic Polyester
Strap Material: Nickel Plated Brass
Terminal Screws: Nickel-Plated Brass 10-32
Dielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Grounding: Grounded To Enclosure
Pole: 3
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Flammability: Rated V-0 per UL 94
Operating Temperature: -40¡C to 60¡C
Contacts: Silver-Cadmium .031 Thick
Enclosure Cover Material: Steel
Face Material: Thermoplastic Polyester
Strap Material: Nickel Plated Brass
Terminal Screws: Nickel-Plated Brass 10-32
Three-Pole AC Manual Motor Controller
30 Amp, 600 Volt, Toggle Three-Pole AC Manual Motor Controller In Type 1 Metal Enclosure, Industrial Grade, Grounded To Enclosure, Back & Side Wired, Suitable as a Motor Disconnect - Gray
Powerswitch¨ Industrial Grade AC Manual Motor Controllers provide safe, reliable control of a variety of motor loads. Typical applications include manual ON/OFF switching control of conveyor systems, pumping machines, HVAC systems, air compressors and other heavy manufacturing equipment. These motor controllers are available for both single-phase and three-phase applications.
Electrical Specifications
Amperage: 30 ADielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Grounding: Grounded To Enclosure
Pole: 3
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Environmental Specifications
Enclosure Rating: Type 1Flammability: Rated V-0 per UL 94
Operating Temperature: -40¡C to 60¡C
Material Specifications
Base Material: Thermoplastic PolyesterContacts: Silver-Cadmium .031 Thick
Enclosure Cover Material: Steel
Face Material: Thermoplastic Polyester
Strap Material: Nickel Plated Brass
Terminal Screws: Nickel-Plated Brass 10-32
Toggle: Thermoplastic Polyester
Yoke: Nickel-Plated Brass
Terminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, T3, L1, L2 & L3 marked on back of device
Termination: Back & Side
Torque Range: 25 inch pounds maximum
Device Type: Enclosed Switch
NEMA: WD-1 & WD-6
NOM: NOM-ANCE
UL 60947-4-1: supersedes UL 508
Warranty: 10-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Yoke: Nickel-Plated Brass
Mechanical Specifications
Product ID: Ratings are permenantly marked on deviceTerminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, T3, L1, L2 & L3 marked on back of device
Termination: Back & Side
Torque Range: 25 inch pounds maximum
Product Features
Color: GrayDevice Type: Enclosed Switch
Standards and Certifications
ANSI: C-73NEMA: WD-1 & WD-6
NOM: NOM-ANCE
UL 60947-4-1: supersedes UL 508
Warranty: 10-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Electrical Specifications
Amperage: 30 ADielectric Voltage: Withstands 2200V for 1 min.
Endurance: 6,000 cycles inductive motor type load
Grounding: Grounded To Enclosure
Pole: 3
Temperature Rise: 50¼C Max at full rated current
Voltage: 600 VAC
Environmental Specifications
Enclosure Rating: Type 1Flammability: Rated V-0 per UL 94
Operating Temperature: -40¡C to 60¡C
Material Specifications
Base Material: Thermoplastic PolyesterContacts: Silver-Cadmium .031 Thick
Enclosure Cover Material: Steel
Face Material: Thermoplastic Polyester
Strap Material: Nickel Plated Brass
Terminal Screws: Nickel-Plated Brass 10-32
Toggle: Thermoplastic Polyester
Yoke: Nickel-Plated Brass
Terminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, T3, L1, L2 & L3 marked on back of device
Termination: Back & Side
Torque Range: 25 inch pounds maximum
Device Type: Enclosed Switch
NEMA: WD-1 & WD-6
NOM: NOM-ANCE
UL 60947-4-1: supersedes UL 508
Warranty: 10-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
Yoke: Nickel-Plated Brass
Mechanical Specifications
Product ID: Ratings are permenantly marked on deviceTerminal Accom.: #10-#8 AWG
Terminal ID: T1, T2, T3, L1, L2 & L3 marked on back of device
Termination: Back & Side
Torque Range: 25 inch pounds maximum
Product Features
Color: GrayDevice Type: Enclosed Switch
Standards and Certifications
ANSI: C-73NEMA: WD-1 & WD-6
NOM: NOM-ANCE
UL 60947-4-1: supersedes UL 508
Warranty: 10-Year Limited
cUL per CSA C22.2 No. 111: File #E63969
