Occupancy Sensor, Lev-Lok, PIR, Wall Switch, 2100SF, 120-277V, White, Self-Adaptive, Decora¨

• Fits in standard wallbox and replaces single-pole wall switch; ground connection required. Gangable with other units
• Low-profile design eliminates obtrusive Òscanning-deviceÓ look. Elegant Decora wallplates compliment any interior for sleek aesthetics; uses Decora wallplates and coordinates with LevitonÕs popular line of Decora wiring devices
• 180¡ field-of-view provides approximately 2100 square feet of coverage suitable for small offices, conference rooms, class rooms, stock rooms, lounges, private restrooms and a variety of commercial areas
• Convenient pushbutton provides manual-ON/OFF light switching at any time
• Two dual element PIR sensors used to widen detection range
• Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive Òminor motionÓ area where even slight body movements will be detected
• Vandal resistant PIR lens
• Lev-Lok makes installation and replacement simple with latch-and-lock system which streamlines installation and reduces costs
• The Lev-Lok wiring module is keyed so that it cannot be installed incorrectly, saving time during installation and making maintenance quicker, safer and easier
• Horizontal field-of-view may be adjusted between 180¡ and 60¡ of arc by using integral blinders located on either side of the lens. No masking tape required
• Manual-ON/auto-OFF mode for installations where manual ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings
• Red LED indicator light flashes when PIR sensor detects motion to verify detection is active.
• Time Delay - In adapting mode, the time delay can be configured from 30s (test mode), 5, 10, and 20 minutes. In non-adapting mode, the delay can be configured from 5, 10, 20, and 30 minutes
• Light Sensor adjustable Ambient Light Override ranges from approximately 2Fc (20LUX) to 500+FC (5000+LUX) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
• Light sensor enables the load hold-OFF feature once level has been set
• Self-adjusting delayed-OFF time interval compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching
• Exclusive Walk-Through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
• Vacancy Confirmation, when the time out expires and the relays turn OFF a 30 second vacancy confirmation exists to turn the relays back ON
• False detection circuitry
• Presentation Mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
• Additional manual service switch provided for installer to force lights to hold-OFF or hold-ON during installation
• Beep Warn - unit beeps 3 times after delayed-OFF time expires, then waits 10 seconds before turning lights OFF
• Exclusive Levition H.I.S. Circuitry. Specifically designed to handle todayÕs high inrush electronic ballast loads and offer unmatched durability and service
• Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts.
• No neutral design in optional for retrofit applications