Leviton LDS30-CTC 30/32 Amp Non-Fused Curve Top Safety Disconnect Switch with Informª Technology, Local and Remote Monitoring with Wi-Fi Ð Powerswitch¨
IEC: 60529
ISO: 20653
Ingress Protection: NEMA/UL 50E Type 3R, 4, 4X, 6, 6P, 12, 13 IEC IP66, IP67, IP68, IP69 IP69K
NEMA: 250
NOM: NOM-ANCE
NSF: 14159-1, Hygenic Requirement for the Design of Meat & Poultry Processing Equipment
cULus: cULus UL60947-4-1A (Suitable as Motor Disconnect)
Current Interrupting: Certified for full-rated current and voltage
Dielectric Voltage: 1000 V plus twice rated voltage for 1 minute
Endurance: 6,000 operating cycles at rated current and voltage
Horsepower Rating: Single-phase: 2.0 hp @ 120 V/ 5.0 hp @ 208-240 V, 480 V, or 600 V Three-phase: 10.0 hp @ 208-240 V/ 20.0 hp @ 480 V/ 25.0 hp at 600 V
Short Circuit Current Rating: 10 kA; Fuse Type J; Fuse Size 60A
Voltage: 600 VAC
IEC: 60529
ISO: 20653
Ingress Protection: NEMA/UL 50E Type 3R, 4, 4X, 6, 6P, 12, 13 IEC IP66, IP67, IP68, IP69 IP69K
NEMA: 250
NOM: NOM-ANCE
NSF: 14159-1, Hygenic Requirement for the Design of Meat & Poultry Processing Equipment
cULus: cULus UL60947-4-1A (Suitable as Motor Disconnect)
Current Interrupting: Certified for full-rated current and voltage
Dielectric Voltage: 1000 V plus twice rated voltage for 1 minute
Endurance: 6,000 operating cycles at rated current and voltage
Horsepower Rating: Single-phase: 2.0 hp @ 120 V/ 5.0 hp @ 208-240 V, 480 V, or 600 V Three-phase: 10.0 hp @ 208-240 V/ 20.0 hp @ 480 V/ 25.0 hp at 600 V
Short Circuit Current Rating: 10 kA; Fuse Type J; Fuse Size 60A
Voltage: 600 VAC
30/32 Amp Non-Fused Curve Top Safety Disconnect Switch with Informª Technology, Local and Remote Monitoring with Wi-Fi Ð Powerswitch¨
30/32 Amp 600 VAC Non-Fused Non-Metallic Curve Top Safety Disconnect Switch with Local and Remote Monitoring Inform Technology. Remote monitoring communicated via Wi-Fi requires internet connection. IP66/IP67/IP68/IP69/IP69K Rated, NEMA Type 3R, 4X, 6, 6P, 12, 13 Watertight Enclosure, NSF Certified, UL94V-0, RoHS Compliant
- Curve top design pushes water and debris towards the side of the device and leaves less area for buildup
- How does Inform work? - Sensors are embedded into Leviton devices to monitor device health. Data from sensors can be viewed locally or remotely
- Local monitoring Ð Green LEDs on the cover provide a visual indication that the device is operating under normal conditions, flash red if there is a failure, or flash yellow if there is a buildup of liquid inside of the enclosure that may lead to a potential failure
- Remote monitoring via Wi-Fi Ð includes data like liquid accumulation, enclosure temperature and humidity, line- and load-side voltage values, ground continuity, and more. Access this data 24/7 and get notified of any abnormal operating conditions via the Inform app (mobile and desktop)
Compatible with Wi-Fi¨ 802.11 a/b/g/n networks @ 2.4GHz and 5GHz with WPA or WPA2 security.
If using a variable frequency drive (VFD), it must be installed between the disconnect switch and the motor.
Learn more about our Powerswitch¨ industrial switch portfolio >>
Learn more about Inform Technology >>
Standards and Certifications
CE: CE MarkedIEC: 60529
ISO: 20653
Ingress Protection: NEMA/UL 50E Type 3R, 4, 4X, 6, 6P, 12, 13 IEC IP66, IP67, IP68, IP69 IP69K
NEMA: 250
NOM: NOM-ANCE
NSF: 14159-1, Hygenic Requirement for the Design of Meat & Poultry Processing Equipment
cULus: cULus UL60947-4-1A (Suitable as Motor Disconnect)
Electrical Specifications
Amperage: 30/32 ACurrent Interrupting: Certified for full-rated current and voltage
Dielectric Voltage: 1000 V plus twice rated voltage for 1 minute
Endurance: 6,000 operating cycles at rated current and voltage
Horsepower Rating: Single-phase: 2.0 hp @ 120 V/ 5.0 hp @ 208-240 V, 480 V, or 600 V Three-phase: 10.0 hp @ 208-240 V/ 20.0 hp @ 480 V/ 25.0 hp at 600 V
Short Circuit Current Rating: 10 kA; Fuse Type J; Fuse Size 60A
Voltage: 600 VAC
Environmental Specifications
Operating Temperature: -40¡C to 75¡C UV Resistance: Exposed materials are UV stabilized
Enclosure Screws: Stainless Steel
Gasket: Silicone Rubber
Handle Material: PBT+PC with TPE Overmold
Mounting Feet: PBT+PC
Feature: LED Indication, Wi-Fi Enabled, Curve Top
Product ID: Ratings are permanently marked on device
Screw Terminal Torque: 7 in-lb (0.8 Nám) for Switch/ 15 in-lb (1.7 Nám) for Neutral and Ground
Terminal Accom.: 18 - 8 AWG
Terminal ID: In accordance with UL and international conventions
Material Specifications
Enclosure Material: PBT+PCEnclosure Screws: Stainless Steel
Gasket: Silicone Rubber
Handle Material: PBT+PC with TPE Overmold
Mounting Feet: PBT+PC
Mechanical Specifications
Device Type: Safety Disconnect SwitchFeature: LED Indication, Wi-Fi Enabled, Curve Top
Product ID: Ratings are permanently marked on device
Screw Terminal Torque: 7 in-lb (0.8 Nám) for Switch/ 15 in-lb (1.7 Nám) for Neutral and Ground
Terminal Accom.: 18 - 8 AWG
Terminal ID: In accordance with UL and international conventions
Warranty
Warranty: 3-Year LimitedStandards and Certifications
CE: CE MarkedIEC: 60529
ISO: 20653
Ingress Protection: NEMA/UL 50E Type 3R, 4, 4X, 6, 6P, 12, 13 IEC IP66, IP67, IP68, IP69 IP69K
NEMA: 250
NOM: NOM-ANCE
NSF: 14159-1, Hygenic Requirement for the Design of Meat & Poultry Processing Equipment
cULus: cULus UL60947-4-1A (Suitable as Motor Disconnect)
Electrical Specifications
Amperage: 30/32 ACurrent Interrupting: Certified for full-rated current and voltage
Dielectric Voltage: 1000 V plus twice rated voltage for 1 minute
Endurance: 6,000 operating cycles at rated current and voltage
Horsepower Rating: Single-phase: 2.0 hp @ 120 V/ 5.0 hp @ 208-240 V, 480 V, or 600 V Three-phase: 10.0 hp @ 208-240 V/ 20.0 hp @ 480 V/ 25.0 hp at 600 V
Short Circuit Current Rating: 10 kA; Fuse Type J; Fuse Size 60A
Voltage: 600 VAC
Environmental Specifications
Operating Temperature: -40¡C to 75¡C UV Resistance: Exposed materials are UV stabilized
Enclosure Screws: Stainless Steel
Gasket: Silicone Rubber
Handle Material: PBT+PC with TPE Overmold
Mounting Feet: PBT+PC
Feature: LED Indication, Wi-Fi Enabled, Curve Top
Product ID: Ratings are permanently marked on device
Screw Terminal Torque: 7 in-lb (0.8 Nám) for Switch/ 15 in-lb (1.7 Nám) for Neutral and Ground
Terminal Accom.: 18 - 8 AWG
Terminal ID: In accordance with UL and international conventions
Material Specifications
Enclosure Material: PBT+PCEnclosure Screws: Stainless Steel
Gasket: Silicone Rubber
Handle Material: PBT+PC with TPE Overmold
Mounting Feet: PBT+PC
Mechanical Specifications
Device Type: Safety Disconnect SwitchFeature: LED Indication, Wi-Fi Enabled, Curve Top
Product ID: Ratings are permanently marked on device
Screw Terminal Torque: 7 in-lb (0.8 Nám) for Switch/ 15 in-lb (1.7 Nám) for Neutral and Ground
Terminal Accom.: 18 - 8 AWG
Terminal ID: In accordance with UL and international conventions
Warranty
Warranty: 3-Year Limited
