Image coming soon

Larson Electronics Work Area LED Blasting Light w/ Handle - High Output LED Blasting Gun Light - 10 Watt LED - 120-277V

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
Buy American Compliant The Larson Electronics BLG-LEDP1X10WR-HGL Work Area LED Blasting Gun Light with Handle and Quick-change lens features a 10 watt LED that produces 860 lumens of intense LED illumination and is designed for extreme durability in media blasting applications. This powerful LED light is designed to be mounted to any standard blasting gun (Blasting Gun NOT Included with this LED light). This LED blasting gun light features a specially designed mounting system which allows the unit to be attached to the end of any standard blasting gun and features a polycarbonate handle to help stabilize the blast gun during operation.. This mount includes all necessary mounting hardware and a protective lens cover that can be removed and replaced even when wearing gloves. This protective lens is a simple drop in, drop out configuration behind a twist-on lens frame, allowing operators to twist the lens off and drop in a one as the lens is worn out by exposure to blasting materials such as coal slag, sand and baking soda. This lens is held in place by the delrin twist-on lens holder. We also offer A slot in the bottom of the lens holder allows particles to clear when performing lens changes. This light operates on 24V DC, and is equipped with 100` of cable terminated in a 120-277V AC encapsulated transformer. A specially designed mounting system and quick change protective shield allows operators to use this unit as a blasting gun mounted light source that will stand up to abusive use. The protective lens is offered in polycarbonate or hardened glass materials. The polycarbonate lenses are for metal blast materials, while the glass lenses are for smaller abrasives. This photo shows an open parking lot lit only by ambient light at approximately 9:00 pm`. This photo shows the BLG-LEDP1X10WR-HGL in spot configuration. The building in the distance is 300` away, well illuminated by the LED spotlight. This LED blast gun light is designed to be operated and serviced in the field with gloved on. The quick-change lens design allows operators to quickly and easily swap out lenses without the operator having to remove their gloves. There are no special latches or hinges. Operators simply unscrew the lens holder, tilt the light towards to allow the lens to drop out, tilt the light back to drop a new lens in, and screw the lens holder back in. The lens holder is machined with large tabs on both sides to allow for operators to grab hold of the unit while wearing protective gloves. Since this LED light is mounted onto the handle of the blast gun, the operators grip is reduced. To alive this, Larson Electronics has added an external handle to provide operators with additional control over the blast gun. This polycarbonate handle is machined with deep grooves to provide grip while wearing protective gloves during operation. Additional and replacement handles can be purchased separately, and can be mounted remote from the blast light. Wiring: This blasting light is equipped with 100 feet of 16/3 SOOW cable leading to an encapsulated step down transformer. There is two feet of 600V SOOW cable coming out of the inline transformer, and is terminated in an industrial grade cord cap. This inline power supply for this LED blasting light is an auto sensing universal voltage transformer that operates on any voltage within the 100-277 volts AC 50/60Hz range. This unit allows operators to power the LED blasting light from any 120-277V AC power source, and steps down AC voltage to 24V DC. Plug options include standard 5-15 straight blade plug for 110V wall outlets with ground, NEMA L5-15 twist lock plug for 125V twist lock outlets, NEMA L6-15 twist lock plug for 240V twist lock outlets, BS1363 3-blade plug for United Kingdom outlets, and a two pin Schuko plug for European outlets. The high intensity LED in this light produces 860 lumens, produces a beam over 600ft in length, and has a lifetime of 50,000 hours. This unit is IP68 watertight and able to withstand the rigors of aggressive and heavy duty use applications. Compared to typical gun mounted blasting lights, this compact LED unit is light weight and produces much brighter and intense illumination than comparable incandescent lights. Specifications / Additional Information BLG-LEDP1X10WR-HGL Approvals Lamp Type: LED IP68 Ingress Protection Dimensions: 3"-L 3.8"-W - 4"-H Encapsulated Stepdown Transformer Watts: 10 Polycarbonate Handle LED Life Expectancy: 50,000 hours Quick-Change Lens Lumens: 860 Voltage: 120-277V AC stepped down to 24V DC Special Orders- Requirements Lighting Configuration: Spot/Flood Contact us for special requirements Mounting: Clamp on Blasting Gun Mount Toll Free: 888-325-4448 Lens: Quick Change - Glass or Polycarbonate *Blasting Gun Not Included E-mail: [email protected] Down to Purchase-