Larson Electronics Solar Powered LED Light Beacon - Class I - 30 Strobing Patterns - Motion Sensor with Timer

Made in the USA The Larson Electronics SPLED-CL1B-AT.MS Solar Powered LED Beacon is a Class I, innovative lighting solution suited for applications requiring a high visibility strobing beacon capable of stand alone operation. This unit is visible for more than a mile and offers 30 different strobing patterns and is operated by a timed motion sensor. This Class I, Solar Powered LED beacon (strobing) light produces a brilliant strobing flash that is visible for distances of up to one mile. A 14.4 watt LED strobe light is powered by two 8aH sealed lead acid battery that is automatically recharged during daylight hours by a 30 watt solar panel. The 30 watt solar panel recharges the battery in 5 hours with direct sunlight and can power the beacon for 12 hours with a full charge. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on very cloudy days, the unit will not recharge. The solar panel is weatherproof and designed to catch the maximum amount of sunlight possible when properly mounted. This solar panel is configured to operate via a PIR motion sensor. When motion is detected the sensor will turn on the strobe light, which will continue to run for 15 minutes after motion has been detected. The sealed lead acid battery pack is contained within the solar panel, not the light. The mounting apparatus is designed to allow a variety of mounting options including flat surfaces such as a wall and square or round pole mounting. The beacon is connected to the panel by a 20 foot SOOW cord that provides flexibility for positioning of the solar panel and beacon into their respective optimum locations independently of each other. The waterproof beacon with this unit has a black powder coated die cast base that contains a fully potted circuit board. A clear polycarbonate lens protects the LED assembly and the housing is waterproof, shock resistant and built for reliable and durable operation. The beacon consists of an LED lamp that draws only 1.2 amps and is capable of producing 30 different strobing flash patterns that are visible for more than one mile. The Class I, LED beacon offers several different mounting options. A standard 100lbs grip magnetic mount, 1” NPT pipe mount and a surface mount option. Additional options: Further options include larger batteries and different lights, additional mounting options and different length connecting cords. The SPLED-CL1B-AT.MS Solar Powered LED Beacon is an ideal solution for applications which require an effective obstacle/hazard/warning light, location strobe, attention getting or marker light that have limited or no access to external power sources such as in rural locations or marine environments. Specifications / Additional Information SLED-CL1B Solar Beacon SLED-CL1B Features Operation: Motion Sensor w/ Timer SAEJ845, Class 1- Brightest Rating Panel Dimensions: 14.3"-W x 27.89"-L x 3.19"-D Magnetic Mount Beacon Beacon Dimensions: 4.5"H X 6.5"Diam Multi-Strobe Pattern Options Weight: N/A Waterproof LED Beacon Watts: 14.4 Solar Panel w/ 16 Amp Rating LED Beacon Amps/Hour: 1.2 PIR Motion Sensor Lumens: 1,440 Luminous Efficiency: 100 Lumens per Watt Lighting Configuration: Strobing Flash Visibility: Up To One Mile Ambient Temp: -45¡C to +55¡C Special Orders- Requirements Runtime: 12 Hours Contact us for special requirements Charging Time: 5 Hours Toll Free: 888-325-4448 Battery: (2) 8aH sealed lead acid batteries Intl: +01-903-498-3364 Beacon Mounting: Surface Mount, 1" NPT Pipe Mount, 100lbs Grip Magnetic Mount Fax: 1-903-498-3364 Panel Mounting: Surface or Pole E-mail: [email protected] Down to Purchase