Larson Electronics Replacement Emergency Ballast for EMG Explosion Proof LED Light Fixtures with Low Voltage Bulbs

The EMGBALL-LED1-LV from Larson Electronics is a Low Voltage Emergency Backup Ballast that works in conjunction with a LED fixture to create an emergency lighting system. This ballast provides a maximum of 10 W of output power. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one steel case. The EMGBALL-LED1-LV provides power to the input side of the fixture, including the ballast, and can be used with indoor or outdoor emergency fixture applications. The EMGBALL-LED1-LV supports emergency illumination for a minimum of 90 minutes. With a maximum of 10 W of output power, the EMGBALL-LED1-LV will provide input power to ballasted lamp supporting it at 100% of the AC rated output throughout the 90-minute emergency illumination period. Upon failure of normal power, the ballast instantly begins providing emergency power to the connected lighting load for a minimum of 90 minutes. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the EMGBALL-LED1-LV automatically returns to charge mode. The battery capacity is fully restored in 24 hours. The ballast does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet). Emergency lighting shall be provided by using a standard fixture equipped with the Larson Electronics EMGBALL-LED1-LV. Each unit consists of a high-temperature, maintenance free nickel-cadmium battery, charger and electronic circuitry contained in one 15.34" x 2.25" x 1.16" metal case. Solid-state indicator lights signal operational status. The EMGBALL-LED1-LV unit shall be capable of powering any fluorescent or LED lighting fixture rated at a maximum of 10 W for a minimum 90 minutes regardless of local switch position. The EMGBALL-LED1-LV shall allow the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. The EMGBALL-LED1-LV unit shall exceed emergency standards set forth by the current NEC. It shall be UL Listed, suitable for damp location. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EMGBALL-LED1-LV Low Voltage Emergency Backup Ballast Ratings/Approvals UL Listing: United States - Canada Factory or Field Installation (Indoor and Damp) Dimensions: 15.34"L x 2.25"W x 1.16"H U.S Certificate Weight: 3.6 lb Canada Certificate Total Watts: N/A AC Input Voltage: 120/277 V AC (Auto Select), 60 Hz AC Input Current: 60 mA Maximum AC Input Power Rating: 4.0 W Maximum Maximum Load Power: 10 W (Including AC Ballast/Driver) Output Current: 10-50 V DC Illumination Time: 90 Minutes Test Switch: Yes - Illuminated Ambient Temperature Rating: 0°C - +55°C (32°F - 131°F) Battery: Nickel-Cadmium Battery Life Expectancy: 7-10 Years Special Orders- Requirements Battery Charging Current: 180 mA Contact us for special requirements Recharge Time: 24 Hours Toll Free: 888-325-4448 Charging Indicator Light: LED Intl: 1-214-616-6180 Special Features: Fused Output Load Connections E-mail: [email protected] -Scroll Down to Purchase-