Larson Electronics *RENTAL* Low Voltage Explosion Proof Light - Base Stand Mount - 22 Inch - 150 Watt LED - 12-24V C1D1

Made in Texas This unit is for rentals The RNT-EPL-16BS-1X150LED-LV-50 Explosion Proof LED Light from Larson Electronics is rated Class I Division 1-2 Groups C & D and Class II Division 1-2 and uses a 16 inch Cree LED light head to produce 21,000 lumens of light while drawing only 150 watts. The RNT-EPL-16BS-1X150LED-LV-50 explosion proof LED light provides 10,000 square feet of work area coverage with 21,000 lumens of light output. This portable LED light is mounted to a four leg aluminum base and has an LED light head measuring 16 inches wide by 14 inches tall. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flamable vapors, gases and dusts may be present. Often referred to as simply a “tank light,” this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical containers and ship storage tanks. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge The LED light head produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and further adds to this units desirability as a portable tank lighting solution. This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply removing the light head from the base, passing the light head and base through the manhole separately, and then reassembling the unit once inside. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this LED light cart is 50 feet of SOOW cord, which combined with the 360¡ of rotation and 90¡ of tilt offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights. The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat sinks to properly disperse the heat. Each LED bulb is engineered to disperse and expel this heat quickly and efficiently, keeping the lamp cooler than traditional light sources. This explosion proof LED work light operates at a lower surface temperature than a comparable model with traditional light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the safety within the work environment. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug This explosion proof flood light is equipped with 50 foot of 12/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to common wall outlets. Plug options include 5-15P 15 amp straight blade plug for 110-125V explosion proof outlets, explosion proof 5-20P 20 amp straight blade plug for 110-125V explosion proof outlets, or explosion proof 6-20P 20 amp straight blade plug for 220-250V explosion proof outlets. This unit is also multi-voltage capable and can configured to operate on 11-25 volts AC/DC. Further adding to the versatility and convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. Made in USA Quality Superior LED Benefits 1. Approved Class I Div1-2 Class II Div I-22. Led lamp head requires no lamping. 3. Durable Base Mount constructed of copper free aluminum. 4. No ballast box. No ballast to replace. 5. Extreme long life LEDs reduce maintenance and replacement costs.6. Adjustable LED light head. 7. 25 peel off mylar overspray lamp protectors ship with the unit.8. 21,000 Lumens produced from only 150 watts.9. Mercury free shock proof LED lamp light head. 1. 60,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. 100% recyclable.4. No toxins-lead, mercury.5. No UV light, infrared radiation or CO2 emissions.6. Bright, even light maintains consistent color over time.7. Instant on/off – No flickering, delays or buzzing. 8. Very good color rendering.9. Vibration/impact resistant.10. Significantly cooler operation.11. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information RNT-EPL-16BS-1X150LED-LV-50 Explosion Proof LED Light Ratings/Approval Listing: United States & Canada Class I Division 1, Groups C and D Lamp Type: Cree LED Class I Division 2, Group A,B,C,D Dimensions: 14" x 16" Light head Class II, Divisions 1 & 2, Groups E,F,G Weight: 30 Lbs. Class III, Divisions 1 & 2 Voltage: 11-25V AC/DC T5 Temperature Rating Total Watts: 150 watts Certified to UL844 and C22.2 Standards Total Lumens: 21,000 Paint Spray Booth Approved Luminous Efficacy: 140 Lm/W LEL Approved LED Lamp Life Expectancy: 60,000 Hours IP67 Rated Waterproof Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K Multiple Driver Banks Color Rendering Index: >75 CRI 80% Lumen Retention after 60,000 Hours Beam Lux: 8500@ 1 Meter 1250@ 3 Meters Made in the USA Lighting Configuration: Flood Pattern Ambient Operating Temp Range:-40¡C to 65¡C Special Orders- Requirements Operating Temp Range: T5 Rated Contact us for special requirements Mounting: Aluminum Base Stand Toll Free: 888-325-4448 Wiring: 50 ` SOOW Cord w/ Explosion Proof Straight Blade Plug Intl: 1-214-616-6180 Cord Cap: 5-15P, 5-20P, or 6-20P -Explosion Proof Fax: 1-903-498-3364 Rental Type: Monthly, Weekly, Daily E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPL-16BS-1X150LED-LV-50;Monthly...$299.70 USDWeekly...$161.38 USDSubtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Scroll Down to Purchase