Larson Electronics *RENTAL* Explosion Proof LED Tank Light - Portable Wheelbarrow Cart - Class 1 Division 1 - 21,000 LM

Made in the USA *This unit is for rentals. Please scroll down for rental rates* The RNT-EPL-16C-150LED-RT Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 & 2, Divisions 1 & 2 and uses Cree LEDs to produce 21,000 lumens of light while drawing only 150 watts. The solid state design and wheeled base make this light cart ideal for areas requiring portable work area illumination within environments where explosive gases, vapors, and dust exist or stand the potential to exist. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART* The RNT-EPL-16C-150LED-RT is a cart mounted explosion proof LED light that provides 10,000 square feet of work area coverage with 21,000 lumens of illumination. This portable LED cart light has a removable light head measuring 16 inches by 14 inches which allows the unit to fit through the standard sized manholes or entry passages commonly found in the petrochemical and marine industries. Often referred to as simply a “tank light,” this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical containers and ship storage tanks. The LED light head produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and further adds to this units desirability as a portable tank lighting solution. This portable LED light cart is comprised of a removable 16 inch by 14 inch LED light head mounted atop a solid rubber wheeled, wheelbarrow style cart fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply removing the light head from the cart, passing the light head and cart through the manhole separately, and then reassembling the unit once inside. Included with this LED light cart is 250 feet of SOOW cord which combined with the 360¡ of rotation and 90¡ of tilt offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights. The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This portable work light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. The light head can be removed and used separately from the cart for added convenience. Made in USA Quality Superior LED Benefits 1. Class 1 Division 1-2 Class II Division I-2 Approved2. Fixture arrives assembled and lamped to reduce installation time and cost. 3. Cart constructed of corrosion resistant copper free aluminum. 4. No ballast box. No ballast to replace. 5. Extreme long life LEDs reduce maintenance and replacement costs.6. Solid rubber tires. No flats or tube replacements. 7. 25 peel off Mylar overspray lamp protectors ship with the unit.8. 21,000 Lumens produced from only 150 watts.9. Mercury free shock proof LED lamp light head. 1. 50,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. 100% recyclable.4. No toxins-lead, mercury.5. No UV light, infrared radiation or CO2 emissions.6. Bright, even light maintains consistent color over time.7. Instant on/off – No flickering, delays or buzzing. 8. Very good color rendering.9. Vibration/impact resistant.10. Significantly cooler operation.11. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information RNT-EPL-16C-150LED-RT Explosion Proof Tank Light Ratings/Approvals Listing: United States & Canada Class 1 Division 1, Groups C and D Lamp Type: Cree LED Class 1 Division 2, Groups C,D Dimensions: 16" x 14" Light head Class 2, Divisions 1 & 2, Groups E,F,G Weight: 65 Lbs. Class 3, Divisions 1 & 2 Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC T5 Temperature Rating Total Watts: 150 watts Certified to UL844 and C22.2 Standards Lumens: 21,000 Paint Spray Booth Approved Luminous Efficacy: 140 Lm/W LEL Approved Beam Lux: 9000@ 1 Meter - 1750@ 3 Meters IP67 Rated Waterproof LED Lamp Life Expectancy: 60,000 Hours Multiple Driver Banks Lighting Configuration: Flood Pattern 80% Lumen Retention after 50,000 Hours Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K Color Rendering Index: >75 CRI Special Orders- Requirements Temp Rating: T5 -50C to +65C Contact us for special requirements Wiring: 250` 16/3 SOOW Cord Explosion Proof Straight Blade Plug Toll Free: 888-325-4448 Mounting: Non Sparking Aluminum Cart w/ Rubber Wheels Intl: 1-214-616-6180 Rental Type: Monthly, Weekly, Daily Fax: 1-903-498-3364 E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental Prices for the RNT-EPL-16C-150LED-RT;Monthly...$415 USDWeekly...$243.78 USDSubtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Scroll Down to Purchase-