Larson Electronics *RENTAL* 50KVA Power Distribution Panel - 480V to 120/240V 1PH - (12) L5-30R Receptacles - 20' Type W Cord

THIS UNIT IS FOR RENTALSMade in TexasThe Larson Electronics RNT-MPD-480V.1P-50KVA-12X120.30A.TWL-MOD1 power distribution substation single-phase 480VAC electrical current into single-phase 120/240VAC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*Portable Power Distribution Purpose and UseThe RNT-MPD-480V.1P-50KVA-12X120.30A.TWL-MOD1 portable power distribution system gives operators the ability to power their 120 volt equipment from a single system. On the primary side, operators connect 440-480 volt line-in power via 20` of #6 Type W cord with a 3100P7W connector. On the secondary side, operators connect to twelve L5-30R receptacles for 120V equipment. All receptacles are equipped with weatherproof covers.Operation: A 20` #6 Type W line-in cord with a 100-amp 480V 3100P7W connector brings 440-480V single phase power to a customer-provided primary disconnect and passes 480V single phase power through to the transformer. The NEMA 3R 50KVA transformer converts 480V to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 200-amp 120/240V single phase main circuit breaker panel. This secondary panel contains twelve 30-amp 1-pole breakers protecting twelve 30-amp 125V L5-30R receptacles.Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This can be replaced with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs for an additional cost. Larger units are available upon request, and can be equipped with skids or trailer mounted.Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information RNT-MPD-480V.1P-50KVA-12X120.30A.TWL-MOD1 Power Transformer RatingsLine-In Cord: 20` #6 Type W Cord Max Primary OCP: 100A @ 480VLine-In Connector: 100A 3100P7W [480V] Max Secondary Output: 200A @ 240VPrimary Voltage: 440-480VAC 1PH UL 1640 Portable Power-Distribution EquipmentPrimary Disconnect: Customer Provided NEMA 3R Indoor / Outdoor UsePrimary Protection: Customer Provided Disconnect Made in the USATransformer: 50KVA 480V to 120/240V 1PH 60 Hz N3R Secondary Voltage: 120/240VAC 1PH Secondary Panel: 200A 120/240V 1PH MCB N3R Secondary Breakers: (12) 30A 1P [125V] Secondary Receptacles: (12) L5-30R [125V] Special Orders- RequirementsSecondary Protection: Breakers, Weatherproof Covers Contact us for special requirementsForm Factor: Square tube frame, skid pockets, top pick eye & 8” locking casters Phone: 1-214-616-6180Frame Materials: Powder coated steel frame Toll Free: 888-325-4448Dimensions: 34” X 44” X 58” Fax: 1-903-498-3364Weight: 600 pounds E-mail: [email protected] CAN RENT THIS UNIT. CONTACT 888-325-4448.*Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.**All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*