Larson Electronics *RENTAL* 15KVA Temporary Power Distribution - 480 to 208Y/120V 3PH - (12) 120V GFCIs - 100' Cord

This unit is for rentals. The Larson Electronics RNT-MGL-100C-480-15K-120-208Y-12X20 Temporary Power Distribution Station converts 480VAC electrical current into 208Y/120VAC three-phase. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The RNT-MGL-100C-480-15K-120-208Y-12X20 temporary power distribution system gives operators the ability to power their 120 and 208 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power using 100` of 10/4 SOOW cord. On the secondary side, operators connect to twelve, duplex GFCI receptacles for 120V equipment. Description: A 100` 10/4 SOOW line-in cord with a NPJ3484 plug brings 480V three phase power into the NEMA 3R 30-amp 480V three phase primary disconnect, which is fused at 25 amps, and passes power through to the transformer. The NEMA 3R 15KVA transformer converts 480V to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 208Y/120V three-phase 50-amp main lug only panel. This secondary panel contains twelve, 20-amp 125V 1P breakers protecting twelve, 20-amp 125V duplex 520R-GFCI receptacles. The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA, and can be equipped with skids or trailer mounted. Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information RNT-MGL-100C-480-15K-120-208Y-12X20 Temporary Power Distribution Ratings/Approvals Line In: 100` 10/4 SOOW Cord with NPJ3484 Max Primary OCP: 25A @ 480V Primary Disconnect: 480V 3PH 30A N3R Fused @ 25A Max Secondary Output: 41.6A @ 240V Transformer: 15KVA 480 to 208Y/120V 3PH N3R Certified for United States & Canada Secondary Panel: 208Y/120V 3PH 50A MLO Panel N3R UL 1640 Portable Power-Distribution Equipment Secondary Receptacles: (12) 20A 520R-GFCI Duplex [125V] NEMA 3R Indoor or Outdoor Use Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Made in the USA Dimensions: 40" x 40" x 48" Weight: 650 lbs Special Orders- Requirements Rental Type: Monthly, Weekly, Daily Contact us for special requirements *All grounding shall comply with state and local codes and meet Toll Free: 888-325-4448 the minimum requirements of the National Electronic Code Intl: 1-214-616-6180 section 250* E-mail: [email protected] Scroll Down to Purchase