Larson Electronics Power Distribution System - 45KVA 3-Phase 480V to 120/208Y - 6 X 480V Breakers/Outlets and 11 X 120v

MADE IN THE USA This Larson Electronics 45KVA Power Distribution System includes a 200-amp three phase 480 volt main breaker panel on the primary side and a 100-amp, 120/208Y, 3-phase main breaker panel on the secondary side. Both panels are rated NEMA 3R. On the 480V load center four L16-30R receptacles are protected by four 30-amp, 480V breakers, one HBL4100R7 outlet is protected by a 100-amp, 480V breaker and one HBL460R7W receptacle is protected by a 60-amp breaker. The 480V primary panel feeds the 45 KVA 480V to 120/208Y transformer. The NEMA 3R transformer feeds the 100-amp, 120/208Y secondary load center. This 100-amp main breaker panel has six 20-amp breakers protecting 120V GFCI outlet, three 60-amp HBL560R9W outlet protected by 60-amp breakers and two Hubbell CS6369 outlets protected by 50-amp breakers. Click Photo to Enlarge The transformer is mounted on a 1/8” thick steel plate mounting platform and the load center/distribution assembly is mounted within a 2-inch square carbon steel tubing frame, resulting in an extremely stable and well protected power distribution platform. This model is equipped with four heavy duty polyurethane 8-inch locking casters, skid pockets and a top located lifting eyelet. The entire frame is powder coated. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These power transformers are popularly used in applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480X6-45K-120X11 Power Distribution Substation Ratings Line In: Three Phase 480 VAC with line-in cable provided by the customer UL 1640 Portable Power-Distribution Equipment Primary Load Center: 200-amp MB – 480V - NEMA 3R NEMA 3R Indoor or Outdoor Use Primary 480V Receptacles: (4) Hubbell L16-30R, (1) HBL4100R7, (1) HBL460R7W Made in the USA Transformer KVA: 45 KVA 480V to 120/208Y NEMA 3R Secondary Load Center: 100-amp MB – 120/208Y – NEMA 3R – 24 spaces Secondary 120/208Y Receptacles: (6) 20-amp 120 Volt GFCI, (2) Hubbell CS6369 50-amp, (3) Hubbell HBL560R9W 60-amp Frame: Powder coated/painted carbon steel frame with skid pockets, locking casters and top pick-eye Ground: Mechanical Ground Transport: 8" locking polyurethane casters, forklift access and pick eye Special Orders- Requirements Dimensions: W-48" X L-48" X H-55" Contact us for special requirements Weight: ~850lbs Toll Free: 888-325-4448 American Made E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase