Larson Electronics Power Distribution System - 240D/120V 3PH - (30) L6-30R Receptacles

Made in Texas The Larson Electronics MGP-1X800A.240D.3P-2X400A.240D.3P-30X30A.2P power distribution substation provides access to 240D/120V three phase. This unit provides operators the ability to safely tap into and distribute 240V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MGP-1X800A.240D.3P-2X400A.240D.3P-30X30A.2P portable power distribution system gives operators the ability to power their 240 volt equipment from a single system. On the primary side, operators bring 240V three phase power into the system using a customer provided cord. Operators can use thirty L6-30R receptacles for 240V three phase equipment. All receptacles are equipped with weatherproof covers. Operation: Operators provide line-in cable connections to the primary 240V three phase 800-amp non-fused NEMA 3R disconnect. The primary disconnect passes 240V three phase power to two 400-amp 240D/120V three phase main panels. Both panels each contain fifteen 30-amp breakers protecting fifteen 30-amp L6-30R 250V receptacles. On the entire power distribution system, operators are provided access to a total of thirty L6-30R 250V receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with top located tool tray, forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Units are available up to 150kva and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGP-1X800A.240D.3P-2X400A.240D.3P-30X30A.2P Power Distribution System Ratings Line-in Cord: Customer Provided UL 1640 Portable Power-Distribution Equipment Primary Voltage: 240V 3PH NEMA 3R Indoor or Outdoor Use Primary Disconnect: 800A 240V 3PH Non-fused N3R Made in the USA Primary Panels: (2) 400A 240D/120V 3PH Main Panel N3R Primary Breakers: (30) 30A Primary Receptacles: (30) 30A L6-30R [250V] Primary Protection: Disconnect, Weatherproof Covers Form Factor: Cube style with skid pockets, 8-inch locking casters and top pick eye Dimensions: 34”-L X 44”-W X 58”-H Weight: 650lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 800A @ 240V Toll Free: 888-325-4448 Max Secondary OCP: - E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase