Larson Electronics Power Distribution System - 208V Primary - 75KVA transformer - 400V Secondary Voltage - 125A Panel

Made in the USA The Larson Electronics MGS-208-75K-400-125A power distribution substation converts 208VAC three phase electrical current into 400VAC, making it available via a 4125R6W, 125 amp receptacle. This unit provides operators the ability to safely tap into and distribute 208VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* With this system, operators can connect entertainment related equipment into a 125-amp pin-and-sleeve style Hubbell 4125R6W. The MGS-208-75K-400-125A portable power distribution panel provides an effective power source for operators in the entertainment industry. Line in power is facilitated via cam-lock style male connectors (black, red, blue, and green). The transformer is protected by a 400-amp disconnect fused at 250 amps. The transformer takes 208V and passes 400V to the 125-amp breaker enclosure. The 125-amp breaker protects a Hubbell 4125R6W, 3-pole, 4-wire receptacle. The transformer and distribution assembly is mounted onto a rugged, powder coated, carbon steel frame with integrated skid pockets, a top located lifting eyelet, and steel floor transformer mount support. The standard frame is constructed of 2" x 1/8" thick square tubing and powder coated for corrosion resistance. This can be replaced with stainless steel, hot dip galvanized steel, or aluminum depending on the customer`s needs, for an additional cost. This power distribution system is weatherproof and ideal for outdoor use and applications including but not limited to, plant maintenance, welding stations, shows, exhibits and marine applications. In addition to the top pick-eyes and skid pockets, this power distribution system includes a set of four 8-inch polyurethane casters (2 locking and 2 swiveling) that enable the operator to easily move and position the portable power distribution system. This unit is rated for outdoor use. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information MGS-208-75K-400-125A Portable Power Transformer r Ratings Line In: 208VAC Three Phase UL 1640 Portable Power-Distribution Equipment Line Out: 400VAC Three Phase NEMA 3R Indoor or Outdoor Use Disconnect: 400-amp (fused at 250 amps) Made in the USA Transformer: 75 KVA – 208 to 400V 3PH Nema 3R Secondary Breaker Enclosure: 480V 125-amp 3PH Nema 3R Secondary Receptacles: 125-amp 4125R6W Form Factor: Powder coated, steel cube with skid pockets and top pick eye Mobility: (2) locking 8” polyurethane castes & (2) swiveling 8” polyurethane casters Dimensions:36"-W x 30"-D x 56"-H Weight:~500lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 250A @ 208V Toll Free: 888-325-4448 Max Secondary OCP: 125A @ 400V Max Secondary Output: 108.3A @ 400V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase