Larson Electronics Mobile Power Distribution Center - 208V to 120/208V - (2) 208V (10) 120V GFCI Outlets

Made in the USA The Larson Electronics MDC-208V-125MB-2X30A-10X20A Mobile Distribution System distributes and steps down 208V AC electrical current to 120V AC. This power distribution system provides operators the ability to safely tap into 208V AC power from a variety of sources including generators and direct grid power. This portable system is suitable for outdoor applications. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, SPIDERBOX, OR SUBSTATIONS* The MDC-208V-125MB-2X30A-10X20A temporary power distribution system gives operators the ability to power their 208V and 120V equipment from a single system. Operators connect 208 volt using a 20` 2/5 Type-W line-in cord, which brings power into the system. Two L6-30R receptacles for 208V equipment and ten 5-20R GFCI duplex receptacles for 120V equipment are available for completing power connections. 5-20 120V, GFCI Receptacle Breaker Panel 30 Amp Receptacle Cord Reel Side Profile Operation: A 20` 2/5 Type-W line-in cord brings 208V power to the main load center, which is protected by a 125-amp load center with main breaker for circuit protection. The 120/208V panel contains two 30-amp, 208V breakers protecting two 208V L6-30R receptacles, and ten 20-amp, 120V breakers protecting ten 120V 5-20R GFCI duplex receptacles. All receptacles are equipped with weatherproof covers. The distribution assembly is mounted to a standard upright steel dolly cart, cross-style frame, resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat tires and a cart style mounting platform provides easier substation mobility. This temporary power distribution unit can be modified to meet the needs of job-site receptacle requirements. Full power distribution units are available up to 150kva, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MDC-208V-125MB-2X30A-10X20A Mobile Distribution Center Ratings/Approvals Line In: 208V via 20` 2/5 Type-W Cord UL 1640 Portable Power-Distribution Equipment Panel: 125A Main Breaker 120/208V Panel NEMA 3R Indoor or Outdoor Use Breakers: (2) 30A, (10) 20A Made in the USA Outlets: (2) L6-30R [208V], (10) 5-20R GFCI Duplex Receptacles [120V] Protection: GFCI, Weatherproof Covers Grounding: (1) 8` Copper Wire for use with driving ground rods Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Dimensions: 24"-L x 18"-W X 52"-H Special Orders- Requirements Weight: 65lbs Contact us for special requirements Max Primary OCP: 125A @ 208V Toll Free: 888-325-4448 E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase