Larson Electronics Magnetic Mount Explosion Proof Network IP Camera - 4.0MP, Built-in IR - 20FPS - IP66 Rated - N4X

The EXPCMR-IP-POE-4MP-IR-M Magnetic Mount Network Explosion Proof Camera from Larson Electronics is a remote inspection camera specifically designed for observation in hazardous locations. This explosion proof, dust/ignition proof, weather proof and tamper resistant camera provides the operator with a live feed from inside tanks, reactors, vessels or other hazardous locations. Equipped with built-in infrared, this remote inspection camera saves both time and money as well as contributing to workplace safety. Camera Features: The EXPCMR-IP-POE-4MP-IR-M Magnetic Mount Network Explosion Proof Camera features a built-in 1/3" progressive-scan CMOS image sensor that delivers up to 4.0MP resolution at 20 fps. The wide angle fixed lens with 83¡ field of view is designed to cover large areas and work spaces. This explosion proof camera provides a crisp and clear image for everything within the 83¡ focal area. Total distance is dependent on mounting height and angle. The explosion proof unit comes with built-in infrared lights. For additional infrared illumination, an external infrared light can be used with the explosion proof device (not included). For 12-24V DC applications, we recommend the Larson Electronics 12-watt explosion surface-mount infrared LED light (EXHL-TRN-LE3-IR-1224). As an alternative, we also offer the EXHL-TRN-LE3-IR-1227 for 120-240V AC applications. This remote inspection camera utilizes 120dB true Wide Dynamic Range, 3D Digital Noise Reduction and a true day/night IR-Cut Filter Removal to produce clear images in variable and low light conditions. The camera automatically switches from full color to IR mode when visible light falls below a certain level. Wiring: Link-up with the camera is achieved via a customer provided RJ45 Ethernet cable which is ran back to the customer provided DVR system mounted outside the hazardous location. Camera power is delivered via the same Ethernet cable using Power over Ethernet (PoE) technology. This not only increases flexibility in deployment, but also provides time and cost savings as well. Our explosion proof cameras with Power over Ethernet (PoE) features enable data transfers and power to be passed through a single Ethernet cable that is usually a Cat 3/Cat 5 cable or better. There are several types of PoE, which come with their own respective standard and maximum power to port capabilities. The IEEE 802.3af PoE standard, with a voltage range of 44.0 - 57.0V, offers 15.4W of DC power for each port. The IEEE 802.3at PoE standard, with a voltage range of 50.0 – 57.0V, provides up to 30W of DC power per port, which is ideal for surveillance cameras, antennas and network access points. The IEEE 802.3bt PoE standard, with a voltage range of 50.0 – 57.0V, provides 60W of DC power for each port. In order to utilize PoE properly, the components, such as the receiving unit and sending device, must be PoE compliant. Recording: To record the stream from this camera, a NVR (network video recorder) is required. Larson Electronics provides a line of explosion proof, hazardous location, and non-classified NVR`s to work in conjunction with this explosion proof camera. This camera is live-view capable without any NVR system via remote access to the camera. Three streams are available, one main stream for recording and two sub streams for live viewing or additional resources. Each steam can be configured to different resolutions and frame rates. Mounting: The EXPCMR-IP-POE-4MP-IR-M Network explosion proof remote observation camera is typically mounted to flat surfaces for observation via two 100 pound magnets. The included adjustable flat surface magnetic mount bracket has two set screws on the bracket, allowing operators to loosen the mounting bracket, adjust the camera`s tilt orientation, and retighten to hold the camera in position. A single thru-hole mounting bolt allows operators to adjust the rotation of the camera by loosening one bolt. Applications: Vessel, tank and reactor monitoring, remote observation of external facilities, monitoring of cleaning, spray patterns, mixing, foaming, reaction, and level. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EXPCMR-IP-POE-4MP-IR-M Network Explosion Proof Camera Quick Summary Dimensions: 8"L x 6"W x 13"H Class I, Divisions 1 & 2, Groups B, C, D Camera Weight: 6 lb Class I, Zones 1 & 2, Groups IIB+H2, IIA Total Watts: 5W (Max) Class II, Divisions 1 & 2, Groups E, F, G Power Source: PoE (802.3af) Class III, Divisions 1 & 2 Image Sensor: 1/3" Progressive Scan CMOS sensor Ex db IIC Gb Signal System: NTSC Ex tb IIC Gb Db IP66 Video Resolution: 4.0MP (2688*1520) NEMA 3, 4, 4X, 7 (B, C, D), 9 (E, F, G) Frame Rate: Up to 20fps @ 2688*1520 resolution Main steam and two sub streams Compression Type: H.264, H.264 OVC, MJPEG Capable of programming unique settings per stream Bit Rate: 32Kbps - 16Mbps ONVIF Profile S Certified Focal Length: 4mm WDR (wide dynamic range) for auto adjusting Max Field of View: 83¡ Shutter Speed: 1/3s to 1/10,000s Min. Illumination: 0.01 lux (Color) / 0 lux (w/ Built-in IR) Infrared Light: Built-in Day/Night: True D/N w/ Mechanical Cut Filter Digital Noise Reduction: 3D DNR Ethernet Interface: RJ45 Ethernet Speed: 10/100 Protocols: TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP and more Remote Configuration: Yes Special Orders/Requirements Ambient Temperature Range: -22¡F to +140¡F Contact us for special requirements Housing Materials: Copper-free Aluminum Alloy Phone: 1-903-270-1187 Lens Material: 3/8" Thick Tempered Glass Toll Free: 888-325-4448 Mounting: Adjustable Magnetic Mount Fax: 1-903-498-3364 Wiring Hub: (2) 3/4" NPT E-mail: [email protected]