Larson Electronics Magnetic Mount 60 Watt Low Profile LED Flood Light - 20' Cord - 120-277V AC

The LEDWP-500-M-20C Magnetic Mount LED Flood Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood beam without the high heat, fragile construction, or high energy costs of incandescent lighting.The LEDWP-500-M-20C LED flood light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120 VAC. The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.Upper Bracket PositionClick Images to EnlargeAdjusted UpwardsLower Bracket PositionMounted to a Metal WallLens Hood RemovedUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied and emit light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.The LEDWP-500-M-20C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction.Mounting hardware for the LEDWP-500-M-20C consists of a steel coated bracket with 200lb grip magnetic base and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 hz, providing versatile power connection options. The LEDWP-500-M-20C provides an efficient and highly durable alternative to standard quartz and and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power.The LEDWP-500-M-20C is equipped with 20 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 straight blade plug for 110V wall outlets with ground, NEMA L5-15 twist lock plug for 125V twist lock outlets, NEMA L6-15 twist lock plug for 240V twist lock outlets, BS1363 3-blade plug for United Kingdom outlets, and a two pin Schuko plug for European outlets. This versatile work light can be used as an overhead light, pedestal light, and just about anywhere portable and economical yet powerful illumination is needed.Warehouse illuminated by the LEDWP-500-M-20CLEDWP-500-M-20C mounted 15` high illuminating a 30` long by 50` wide parking area.Click Photo to Enlarge Click Photo to EnlargeWith the LEDWP-500-M-20C there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-500-M-20C is ideal for wall pack lighting, wall pack down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples. Specifications / Additional Information LEDWP-500-M-20C Magnetic Mount LED Wall Pack Light LEDWP-500-M-20C FeaturesLamp Type: LED Waterproof/Vapor ProofDimensions: W-9" D-3.25" H-6.5" Operates on Standard 110-277 VACWatts: 60 Impact/Vibration Resistant ConstructionLumens: 5400 50,000 Hour LED LifeVoltage: 110-277 Volts AC 50/60hz ETL Approved for Wet LocationsLighting Configuration: Flood IP68 WaterproofMounting: Adjustable Magnetic Bracket 200lb Grip Magnetic BaseWiring: 20` SOOW cable FCC Part 15 A EMI 3rd Party TestedAmps: 0.5 LED Light Color: Cool White - 6000K Special Orders- RequirementsLED Life Expectancy: 50,000 hours Contact us for special requirementsMaterials: Aluminum Housing, Polycarbonate Lens Toll Free: 888-325-4448Color Rendering Index: 80 Intl: 1-903-270-1187Weight: 9 Lbs. E-mail: [email protected] year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.