Larson Electronics Low Profile Explosion Proof Fluorescent Light Fixture - 2 Foot 4 Lamp Compact Design - 8000 Lumens

Made in the USAThe Larson Electronics EPL-24-96 Low Profile Explosion Proof Fluorescent Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1, Class 2 Division 1 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.The EPL-24-96 fixture is a 2 foot long, 4 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light and an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes equipped with four F24-T5/HO lamps inside the traditional two foot two lamp housing. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and for use in paint spray booths. The EPL-24-96 provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability. Click here to view the LED version of this fixture. Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection. F24-T5HO – 2000 lumens per bulb (4000 lumens total), 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 Note: The EPL-24-96 is only available with T5HO lamps. If you require different lamp options, please see our EPL-24-2L for fluorescent lamps or our EPL-24-2L-LED for fluorescent style LED lamps. Specifications / Additional Information EPL-24-96 Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and DDimensions: W-11.25" L-27.5" H-8.5 " Class 1 Division 2, Group A,B,C,DWeight: 55 Lbs Class II Division 1- 2, Groups E,F,GTotal Watts:96 watts NRTL Certified to UL 844, 924Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz NRTL Certified to UL 1598 Marine TypeTotal Lumens:8000 NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Lamp Life Expectancy:20,000 Hours Listed for Paint Spray BoothsEfficiency: 83.30 Lumens per Watt California Title 24 CompliantMinimum Operating Temp:-30 C Beam Angle: N/A Special Orders- RequirementsColor Temp: 4100K- Contact us for special requirementsMounting: Bracket Standard - Pendant Optional Phone: 1-214-616-6180Wiring Hub: 1/2 inch threaded Toll Free: 888-325-4448Ambient Operating Temp -30 C to 70 C Fax: 1-903-498-3364Operating Temp Rating: -T6 Rated E-mail: [email protected] Case Temp: 90 C