Larson Electronics IND-DWG-FUVC-5X-145W-R2-MS-120V-25C Far-UV Sanitation Portal for Vehicles - (5) 222 nm Excimer Lamps - 304 SS/Power Cord - PIR Motion Sensor

Far-UV Sanitation Portal for Vehicles - (5) 222 nm Excimer Lamps - 304 SS/Power Cord - PIR Motion Sensor This unit is Made In USA - Manufactured in Texas The Larson Electronics IND-DWG-FUVC-5X-145W-R2-MS-120V-25C Far-UV Sanitation Portal for Vehicles can disinfect 99% of viruses, bacteria, mold and spores on trucks, fleets and large equipment. This ozone-free unit offers 222nm UV-C output via five 145-watt excimer lamps, which are considered to be eye and skin safe for humans. Suitable for occupied areas, the far-UV lamps offer instant start and automated operation with a PIR motion sensor. The remote driver, which operates on 120V and 240V 60Hz, is included with the system. *Please note: This product produces Far-UV light.ÊFar UV-C light has shown in some studies to be eye-safe and skin-safe, while still effective as a germicidal and sanitation device, making it safe to use continually in occupied areas. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria.ÊClick here to learn more about UVC and the corona virus* The IND-DWG-FUVC-5X-145W-R2-MS-120V-25C is a powerful sanitation solution that has eye and skin safe features for busy production sites and automotive facilities. This sanitation portal consists of five, 145-watt excimer lamps. Each light offers intense far-UV 222 nm disinfection. The ozone-free lights have an expected lifespan of 10,000+ hours and emit a flood beam pattern with 180 degrees of coverage. This UV light is protected by a quartz glass. The far-UV light can disinfect over 99% of viruses, bacteria, mold and spores. This lamp is considered to be eye and skin safe (the 222nm UV wavelength cannot penetrate the eyes and skin of humans), making applications suitable in occupied areas requiring sanitation. Designed for cool operation, the instant-start light is efficient at eliminating harmful microbes, viruses and bacteria at low doses. The far-UV disinfection portal is made out of 304 stainless steel for corrosion resistance and long-term durability. We offer powder coated finishes for extended, reinforced durability at an additional cost. This system has a passive infrared motion sensor that facilitates automated operation. When movement is detected near the portal, such as when a person is approaching or moving towards the unit, the UV lamps are turned on. After activation, the UV lights remain on for a set period of time as UV treatment occurs. Operators can adjust the time setting to suit their sanitation requirements or preferences. The standard time setting is 90 seconds. This PIR sensor is offered in a single-sided or dual-sided configuration. Benefits of Excimer Far UV Lamps: When it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide Òinstant-onÓ startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications. Germicidal excimer lamps emit far-UV 222 nm light that is generated by specific excimer molecules. The far-UV lights come with an expected lifespan of 10,000+ hours. This gas-filled emitter is energy efficient and offers cool operation. A power supply is typically utilized with the non-toxic lamp to ensure consistent UV output. The sanitation light, which is suitable for use in occupied areas, features instant start capabilities. Voltage: The IND-DWG-FUVC-5X-145W-R2-MS-120V-25C is compatible with 120V AC and 240V AC, 60Hz. Cooled by natural air, the remote driver is included with the system. 5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated L6-15 Twist Lock Plug 15 Amp / 250V Rated UK BS1363 Straight Blade Plug 13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug 16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: This unit is equipped with a 25-foot cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mount: The far-UV portal is designed for standalone applications. This unit can be deployed at automotive sites to clean work vehicles and large equipment. The disinfection unit may also be installed with a conveyor system for continuous passing of equipment through the portal. As this UV solution is eye and skin safe, individuals could drive vehicles through the portal without protective gear. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Suggested Applications: Sanitation, disinfection, commercial locations, industrial parks, medical centers, labs, manufacturing and semiconductors; kills 99% of viruses, bacteria, mold and spores. Call 888-325-4448 to place your Larson Electronics order online today!