Larson Electronics IND-DBL-36-1L-R1-277V Door Barrier Germicidal UV-C Fixture - (1) 30W UV-C Fluorescent Lamp - 36" Wide - Hospital Grade Stainless Steel

and is hard wired. Multiple units can be mounted in tandem to cover wider doorways. ***PLEASE NOTE: Walking through the UV-C light produced by this fixture is completely safe because the short time it takes to walk through the light does not expose people to harmful levels of radiation. However, if stood directly under, it can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.*** The IND-DBL-36-1L-R1-277V is a powerful sanitation solution for clinics, hospitals, operating rooms, and labs. Equipped with a 30 watt UVC fluorescent lamp, this system offers 10.77 total watts of UV output at a wavelength of 254nm. The lights have an expected lifespan of 8,000+ hours and emit a flood beam pattern. The IND-DBL-36-1L-R1-277V does NOT have a motion sensor. Instead, it remains on continuously. This door barrier germicidal fixture provides 170 microwatts per square centimeter at three feet below the fixture and 30 microwatts per square centimeter at floor level when mounted above a seven foot tall door. Operation: This high output UV door barrier germicifal fixture projects ultraviolet rays into the doorway it is mounted above. Bacteria and viruses present in the air that passes through the UV rays produced by the fixture are destroyed. The IND-DBL-36-1L-R1-277V projects a beam of UV-C light straight down from above the doorway to the floor. Construction: The enclosure of the IND-DBL-36-1L-R1-277V is built from hospital grade 304 stainless steel. Mounting: The IND-DBL-36-1L-R1-277V is designed to be wall mounted. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Applications: This ultraviolet UV system can be used to continuously disinfect mold, allergens, airborne bacteria, viruses, and germs. The IND-DBL-36-1L-R1-277V is ideal for use in hospitals, clinics, laboratories, clean rooms, and more. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 or [email protected] to discuss your specific requirements.