Larson Electronics High Intensity LED on Extending Work Light Pole - 150 Watts - 14,790 Lumen - 120-277V AC

Larson Electronics

(No reviews yet) Write a Review
SKU:
TPM-LED5W-30
Weight:
0.00 LBS
Call for price
Made in the USA The Larson Electronics TPM-LED5W-30 Surface Mount LED Light Tower that extends from three feet to eight and a half feet, comes complete with an IP68 rated 150 watt LED light head and produces a 14,790 lumen flood of light capable of illuminating an area 540` in length by 480` feet in width. This pole mounted unit can be used with 120-277 Volts AC and is ideal for use as work area illumination, event lighting, emergency operations lighting, or equipment lighting. The three foot TPM-LED5W-30 surface mount work area light tower that extends to eight and a half feet provides operators with a very versatile lighting solution for operations where easily managed mobile illumination of large sized areas is required. An IP68 rated, 150 watt LED floodlight creates a total of 14,790 lumens of bright white light and provides light coverage for an area 540` long by 480` wide. This unit can also be ordered with LEDs in spotlight configuration to produce a beam 1200` long by 140` in width. Designed to be mounted to flat surfaces via a 4 hole mounting plate, this telescoping light pole can be adjusted to various heights and locked into position as well as collapsed and removed from the mounting bracket for stowing. This mounting system provides extremely secure placement of the tower in areas where high winds are commonly encountered as the weight of the vehicle removes the possibility of the unit swaying excessively or tipping over. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Durability: The TPM-LED5W-30 pole mounted light tower incorporates a single high power LED light emitter on a collapsible aluminum three to eight and a half foot telescoping pole. Thirty CREE XLamp XPG¨ five watt LEDs producing 493 lumens each are arranged in a heavy duty aluminum housing to produce a 60 degree flood beam ideal for use as mobile work and area lighting. The LED unit is waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. Alternatively, the LED unit can also be ordered with optional high purity 25 degree spot beam optics to provide a tighter, longer beam ideal for distance illumination. Larson Electronics TPM-LED5W-30 surface mount lights are ideal replacements for fragile and hot running 400 watt metal halide tower lamps. They offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for various applications where power and reliability is critical. Mounting: This adjustable mounting pole is ideal for boats as operators can mount this next to the console and elevate the lights starting at three feet up to eight and a half feet to illuminate the boat and the surrounding area. By elevating the lights this high, they can eliminate casting and glare while better illuminating a larger area. Essentialy, this adjustable pole provides the benefits of having a mast mounted light without actually having a mast. Once the lights are no longer needed, the pole can be collapse down to three feet and the lights secured before getting underway. Similarly, these poles are ideal for attaching lights to trailers. Operators can park the trailer, extend the lights to their maximum height, and illuminate a large area around the trailer. Once finished with their use, the pole is simply collapsed and the lights stowed for travel. This is a highly convenient setup Angle Adjustment: This unit allows operators to adjust the angle of the entire unit by positioning the trailer hitch at different angles. Adjusting the angle of the tower is accomplished by loosening a thumb bolt at the base of the hitch, which enables the mount to swivel 180 degrees (given enough ground clearance, a greater swivel angle can be achieved.) Once the desired angle is found, simply retighten the thumb bolt to lock the hitch into place. Power: These units come with a multi-voltage inline power supply, allowing the TPM-LED5W-30 to operate on 120-277 volts AC. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: This general use surface mount LED light tower is equipped with 20 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information TPM-LED5W-30-120 LED Light Tower TPM-LED5W-30-120 LED Features Lamp Type: LED IP68 Rated Weatherproof & Waterproof Dimensions: Telescoping - 3` to 8.5` - Light head: 11.69"L x 7.54"H x 4.94"D Adjustable Telescoping Pole Extends 3` to 8.5` Total Watts: 150 Multiple Power Connector Options Lumens: 14,790 Low Amp Draw Voltage: 120-277V AC Long 50,000 Hour LED Life Amps: 1.25 on 120V AC CE Certified Mounting: Flat Surface Mount Telescoping Light Tower Lighting Configuration:: 25¡ Spot or 60¡ Flood LED Light Color: 6000K LED Life Expectancy: 50,000 Hours Special Orders- Requirements LED Housing Colors: Black or White Contact us for special requirements Wiring: 20` 16/3 SOOW w/ General Area Cord Caps Toll Free: 888-325-4448 Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail Fax: 1-903-498-3364 Warranty: YES - 3 Years* E-mail: [email protected] Scroll Down to Purchase-

Reviews