Larson Electronics Hazardous Location Solid-state Magnetic Speed Sensor - 60Vp-p, 40 kHz - SS - Conduit Mount

The Larson Electronics EXP-EL-SNR-MSS-V1 Hazardous Location Solid-state Magnetic Speed Sensor can be used to monitor and measure movement in combustible work sites. This solid-state device offers 60Vp-p minimum output voltage and takes on stainless steel construction. The Class I, II, III and ATEX/IECEx rated unit is compatible with threaded conduit mounting applications. The EXP-EL-SNR-MSS-V1 is a cutting-edge magnetic speed sensor for flammable environments. Equipped with solid-state architecture for durability (no moving parts), this unit operates with an output voltage of 60Vp-p (peak-to-peak, minimum) @ 40 kHz (maximum). An external voltage source is not needed during operation. Powered by a permanent magnet inside the sensor, which generates a fixed magnetic field, this device provides a gear pitch range of 12 DP (module 2.11) or coarser with an optimum actuator of 8 DP (module 3.17) ferrous metal gear. The explosion proof speed sensor offers 115 mH inductance (maximum) and a coil resistance range of 191 ohm to 280 ohm. This unit is constructed of stainless steel. The ATEX/IECEx rated device comes with a T6 temperature rating and has been tested for vibration in compliance with MIL-STD 202F, Method 204D. The unit was also tested under the following specifications: Surface Speed = 25 m/s [1000 in/s], Gear = 8 DP [Module 3.17), Air Gap = 0.127 mm [0.005 in] and Load Resistance = 100 kOhm. Wiring: The explosion proof speed sensor contains 120" of 18 AWG PVC-insulated leads for completing electrical connections. Mounting: The EXP-EL-SNR-MSS-V1 is compatible with threaded conduit mounting applications, with a 5/8-20 UNF-2A mounting thread. Applications: Hazardous locations, petroleum refineries, chemical and petrochemical plants, paint spray booths, food manufacturing buildings and combustible industrial facilities. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EXP-EL-SNR-MSS-V1 Hazardous Location Speed Sensor Ratings Listing: United States, Canada Class I, Divisions 1&2 Groups A,B,C,D Unit Type: Magnetic Speed Sensor Class II, Divisions 1&2 Groups E,F,G Dimensions: 4.75"-L x 0.625"-D Class III Threaded Dimensions: 3.5"-L ATEX/IECEx Rated Weight: 10 oz Ex II 3 G EEx nA II T6 Input Voltage: - MIL-STD 202F, Method 204D Output Voltage: 60Vp-p (Minimum) Operating Frequency: 40 kHz (Maximum) Coil Resistance: 191-280 Ohm Inductance: 115 mH (Maximum) Gear Pitch Range: 12 DP (Module 2.11) or Coarser Optimum Actuator: 8 DP (Module 3.17) Ferrous Metal Gear Minimum Surface Speed: 0.38 m/s (15 in/s) Test Condition Specifications: Surface Speed = 25 m/s [1000 in/s], Gear = 8 DP [Module 3.17), Air Gap = 0.127 mm [0.005 in], Load Resistance = 100 kOhm Operating Temperature: -73¡C to 93¡C Special Orders- Requirements Temperature Rating: T6 Contact us for special requirements Materials: Stainless Steel Phone: 1-214-616-6180 Mount: Threaded Conduit Toll Free: 888-325-4448 Mounting Thread: 5/8-20 UNF-2A Fax: 1-903-498-3364 Wiring: 120" 18 AWG PVC-Insulated Leads E-mail: [email protected]