Larson Electronics Hazardous Location Receptacle, 2-Pole 3-Wire, 20 Amp, 250V AC, C1D2 ATEX IEC-Ex Rated

The Larson Electronics HLO-EX-20A-2P3W-250V Single Phase Hazardous Location Receptacle is a Class 1, Division 2 and Class 2, Divisions 1 & 2 rated receptacle approved for use in hazardous environments where flammable or explosion gases, vapors, or dusts stand the potential to exist and where flammable dusts, fibers, or flyings exist. This 2-pole, 3-wire outlet is designed to provide a secure connection for electrical equipment within the hazardous location. This hazardous location 2-pole 3-wire receptacle is compatible with our HLP-EX-20A-2P3W-250V hazardous location power plugs. This outlet is rated for 20 amps and is ptb 03 ATEX 1227 rated. This receptacle is coded blue to indicate its voltage rating and ground pin position of 6. The color coding of these units makes it impossible to connect different voltages and current ratings, to ensure safe power connection. This single phase receptacle contains a 3 horsepower disconnect switch. The circuit cannot be energized until the plug is inserted and the switch is turned to the on position, and an interlocking switch mechanism feature prevents accidental removal of the plug from the receptacle during operation. The switch can be padlocked in the on or off position. This hazardous location outlet features polyamide construction and a maximum voltage rating of 250V AC @ 50/60 Hz. With NEMA Type 3, 4, 4x and IP66 ratings, this receptacle is suitable for outdoor, marine and wet location. This hazardous location single phase receptacle has a 2 wire 16-10 AWG terminal capacity and a _” NPT bottom entry. This unit has a short circuit current rating of 10kA sym RMS and operates with a T6 ambient temperature rating of -50¼C to +55¼C. Suggested Applications: Chemical and pharmaceutical manufacturing, petrochemical operations, offshore applications, coal mining and other refinery or industrial operations. Specifications / Additional Information HLO-20A-3P4W Explosion Proof Outlet Certifications - Compliance Amp Rating: 20 Class I, Division 2, Groups A, B, C, D Dimensions: 9.13H x 4.13W x 6.6D Class I, Zone 1 & 2, Groups IIC, IIB, IIA Configuration: 2-Pole 3-Wire Class II, Div 1 & 2, Groups E, F, G Conduit: Bottom Entry 3/4" NPT Class III Horsepower: 3HP @ 250V NEMA 3, 4, 4X Compatibility: HLP-EX-20A-2P3W-250V IP66 Waterproof Protection: Interlocking Switch Mechanism & Padlockable ATEX Rated Hub Size: 3/4" NPT IECEx Zones 1, 2, 21 & 22 Terminal Capacity: 2 Wires 16-10 AWG Ambient Temp Rating: -50¼C to +55¼C Special Orders- Requirements Voltage: 250V AC @ 50/60 Hz Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase-